Leybold
The Leybold Turbo.Drive TD20 classic is an electronic frequency converter that drives specific TURBOVAC turbomolecular pumps. The Turbo.Drive TD20 classic converts single-phase mains voltage into a three-phase AC voltage with regulated frequency and amplitude. The Turbo.Drive TD20 classic can be connected directly to mains voltage.[1][2]

The Turbo.Drive TD20 classic is an electronic frequency converter that converts single-phase mains voltage into a three-phase AC voltage with regulated frequency and amplitude. The generated three-phase AC voltage drives the three-phase asynchronous motor of the connected turbomolecular pump. The conversion produces a nominal motor voltage of 47 V.[1][2][4]
The TD 20 accepts a mains input of 100 to 240 V AC at 50 or 60 Hz. The power consumption of the frequency converter, including options, is less than 500 VA. The power consumption of the connected TURBOVAC pump is less than 400 VA. The motor current limitation is 5 A during acceleration (for a maximum of 10 minutes) and 3.5 A during continuous operation. The output frequency range is 0 to 835 Hz.[1][2][4]
The Turbo.Drive TD20 classic comes with a 9-way PLC interface as standard. The unit may also include an optional RS 232, Profibus, RS 485, 25-way PLC, DeviceNet, or Ethernet/IP interface. The frequency converter can be directly connected to mains voltage. The front panel includes a green STATUS LED, a yellow POWER LED, a red ERROR LED, an LED chain labeled LOAD, a SERVICE interface, an RS 232 interface, a START key, and a STOP key.[1][2]
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
No research found yet — worked with this tool? Share what you know.
The following facts about the TD 20 Turbo Drive Vacuum Controller are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the TD 20 Turbo Drive Vacuum Controller are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the TD 20 Turbo Drive Vacuum Controller are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the TD 20 Turbo Drive Vacuum Controller are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the TD 20 Turbo Drive Vacuum Controller are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the TD 20 Turbo Drive Vacuum Controller is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Last updated Aug 20, 2026.
The KLA .498 PSL Wafer is a NIST traceable reference wafer.
The Applied Materials 0010-47763 is an electrostatic chuck (ESC) assembly used in semiconductor etching processes.