Leybold

The THERMOVAC TM201 is a portable vacuum gauge listed by Leybold under its portable and mechanical vacuum gauging category.

The Leybold Heraeus Trivac D 16 A is a vacuum pump manufactured by Leybold Heraeus.

The PIEZOVAC PV201 is a Leybold portable vacuum gauge listed in the portable and mechanical vacuum gauging segment of the vacuum measurement and control product range.

The Leybold Heraeus WA 250 is a vacuum booster pump with 3-phase, 60 Hz, 3450 RPM operation and a 143TC frame motor.

The Leybold MAG 1300 Turbo is a turbo pump.

The Leybold Trivac D 4 A is a vacuum pump.

The Leybold TURBOVAC 50 is a compact turbomolecular vacuum pump with grease-lubricated bearings.

The Leybold CCS Box is a coater manufactured by Leybold.

The Leybold Turbo.Drive TD20 classic is an electronic frequency converter for driving specific turbomolecular pumps.

The Leybold L 560 E-Beam is an e-beam evaporator in the deposition category.

The Leybold Heraeus Membranovac 1 VS is a vacuum pressure controller with a listed power specification of 110V–240V AC, 50/60 Hz, 1.5 VA.

The Leybold Syrus Pro 1100 is a Physical Vapor Deposition (PVD) coater.

The Leybold Syrus C 1510 Optical is an optical coater categorized as precision optics.

The Leybold Turbovac 1000 C is a turbomolecular vacuum pump with a pumping speed of 1000 L/s for N2.

The Leybold MAG W 2800 CT is a turbo pump designed for vacuum systems, operating at 480 Hz.

Leybold Boxer Pro is a coater with an HPE 6 Eelectron gun, Mark II ion gun, and a substrate holder configuration with 3 segments on a calotte.

The Leybold D 30 A is a vacuum pump.

The Leybold D 65 B is a mechanical oil vacuum pump.

Leybold Boxer 700 AR Machine is a refurbished machine described with a turbo pump, gun, ion and thermal source, 2-way crystal head, Polycold, and 60 lens capacity per cycle.

The Leybold TRIVAC D 40 B is an oil-sealed, dual-stage rotary vane vacuum pump with nominal and effective pumping speeds of 46 m3/h and 40 m3/h, an ultimate total pressure below 2 x 10-3 mbar without gas ballast, and a water vapor capacity of 1184 g/h.

Leybold Helios 800 is a sputter coater with a transfer module, three load lock modules, and integrated vacuum equipment.

The Leybold Trivac D 16 A is a vacuum pump.

The Leybold Trivac D 16 A is a rotary vane pump.

Leybold D 8 B is a vacuum pump with listed electrical options, a volume flow rate of 8 m3/h, and a pressure limit of 1x10^-4.

The Leybold Syrus Pro 710 Vacuum Coater is a vacuum coater with a 700 mm chamber inner diameter and a SYRUSpro control system.

The Leybold Turbovac 150 Turbomolecular is a turbomolecular pump.

The Leybold Trivac D 8 B is a two-stage, oil-sealed rotary vacuum pump with an ultimate pressure of ≤ 2 x 10-3 mbar (≤ 1.5 x 10-3 torr) and a pumping speed of 10.2 m³/h (6 cfm).

Leybold CCS pro AR is a coater described with 3-phase, 400 V AC, 50 Hz, 20 KVA power requirements and a listed set of included components.

The Leybold Turbovac 150 Vacuum is a vacuum pump.

Leybold Turbotronik NT 10 is an electronic frequency converter used to drive TURBOVAC 50 and 50D turbomolecular pumps.

The Leybold Syrus Pro 1110 Box is a box coater in the deposition category.

Leybold Turbotronik NT 1000 / 1500 vH is a turbo vacuum pump controller.

Leybold Trivac D 25 BCS PFPE is a rotary vacuum pump.

Leybold WH 7000 is a vacuum pump specified as 11 kW and LVO 210.

The Leybold Syrus Pro 1510 is an evaporator described as a dual APS planetary system used with standard dielectric materials.

The Leybold Turbovac 341 MCT is a turbo pump made by Leybold.

The Leybold IBS 1400 HT GT is a dual ion beam sputtering system with a 4-position target tower, KRI sputter and assist sources, an optical monitor, a planetary substrate carrier, test glasses, a ceramic plate substrate heater, and front and rear doors.