Logitech
WG6
The Logitech WG6 is a polishing system. The Logitech WG6 comprises a PM6 or LP70 precision polishing machine and a WG6 polishing head. The Logitech WG6 can polish a batch of up to 6 samples at one time, or up to 12 specimens when used with two WG6 polishing heads on the LP70.[1]
Power
Powerful, low voltage DC motor[1]
Control era
GUI
What it is
The Logitech WG6 is a polishing system for lapping and polishing applications. The WG6 polishing system comprises a PM6 or LP70 precision polishing machine and a WG6 polishing head.[1]
How it works
The WG6 uses a polishing head mounted on a precision polishing machine to process specimens on a rotating plate. The system supports variable speed, carousel speed, and rotational direction.[1]
The WG6 can process up to six samples at one time, or individual samples, using different sample holders. The WG6 can also be used on an LP70 system with two WG6 polishing heads for processing up to twelve specimens at one time.[1]
Where it fits in the process flow
The WG6 fits in the sample-preparation flow before inspection or microscopy. The system is used to produce finished samples with high reflectivity, low relief, ultra-flat surfaces, or minimal edge roll-off.[1]
Applications
The WG6 supports specimen holding for batch processing or individual processing. The system uses corrosion-resistant materials, a low-voltage DC motor, auto-detection by the PM6 or LP70 system, and incremental loads up to 1.4 kg on each drive rod.[1]
- Rock polishing
- Geological sciences
- Thin section preparation
- Mineralogy
- Petrography
- Sedimentology
- Polishing rock, coal, concrete and soils
What do the numbers mean?
Power & electrical1
Performance1
Dimensions & facilities2
Configuration & options8
Vintage & configurations
Control-system eraGUI[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- MotorPowerful, low voltage DC motor[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What machines make up the WG6 polishing system?
The WG6 polishing system comprises a PM6 or LP70 precision polishing machine and a WG6 polishing head.[1]
How many samples can the WG6 process at one time?
The WG6 can process a batch of up to six samples at one time, or individual samples. The LP70 configuration with two WG6 polishing heads can process up to twelve specimens at one time.[1]
What surface results is the WG6 designed to produce?
The WG6 is capable of producing high reflectivity, low relief, ultra-flat surfaces, or minimal edge roll-off.[1]
Not publicly documented
The following facts about the WG6 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the WG6 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the WG6 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
No publicly documented failure modes or field errata for the WG6 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the WG6 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the WG6 are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]web.archive.org — web.archive.orgweb.archive.org
Last updated Oct 11, 2026.
Compare with similar tools
View all →
The Logitech 1 DP 41 is a polisher with 3-phase, 50/60 Hz, 480 V, 12 amp electrical requirements.
The Strasbaugh 100R16 is a 1-spindle grinder/polisher with a DC drive system and 2 motors. The Strasbaugh 100R16 has a 16-inch capacity.
The Lapmaster 12 Benchtop Lapping / Polishing Machine is a bench-mounted single-sided lapping and polishing machine with a 12-inch plate diameter.
