Mydata

ATM 8 Tray Magazine

Research Quality: 30% complete

Provisional entry — research in progress

This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.

The Mydata ATM 8 Tray Magazine is a tray-feeding magazine for pick-and-place equipment. The Mydata ATM 8 Tray Magazine can hold up to eight JEDEC trays in a single magazine slot. The Mydata ATM 8 Tray Magazine uses tray holders with a unique ID chip and a matching barcode.^[1]

MydataATM 8 Tray Magazine

No photo available yet

How it works

The Mydata ATM 8 uses tray holders with a unique ID chip and a matching barcode. The Mydata ATM 8 guides tray replacement with an LED indicator that shows which tray needs to be replaced. The Mydata ATM 8 allows exchanging or refilling a tray in less than a minute. The Mydata ATM 8 uses software-controlled tray acceleration to protect delicate components. The Mydata ATM 8 can be removed and retrofitted into any position in the machine.^[1]^[3]

Where it fits in the process flow

The Mydata ATM 8 is intended as a tray feeding solution for production environments and for medium to large volumes. The Mydata ATM 8 allows the pick-and-place machine to continue mounting non-tray components while the tray magazine is being replenished.^[1]^[3]

What do the numbers mean?

Control & software1

Tray acceleration control: Software controlled^[1]

Configuration & options6

Make: Mycronic / Mydata^[2]
Model: ATM 8^[2]
Type: Tray magazine^[2]
Capacity: Up to 8 JEDEC trays^[1]
Magazine slots: 1 slot^[1]
Tray holder identification: Unique ID chip and matching barcode^[1]

Interested in this tool?

Need help with this tool?Embed spec card

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

How many trays can the Mydata ATM 8 hold?

The Mydata ATM 8 can hold up to eight JEDEC trays.^[1]^[3]

How much feeder space does the Mydata ATM 8 use?

The Mydata ATM 8 takes up one slot.^[1]^[3]

How does the Mydata ATM 8 help with tray identification and replacement?

The Mydata ATM 8 uses tray holders with a unique ID chip and a matching barcode. The Mydata ATM 8 also uses an LED indicator to show which tray needs to be replaced.^[1]^[3]

Can the placement machine continue running while the Mydata ATM 8 is replenished?

The pick-and-place machine can continue mounting non-tray components while the Mydata ATM 8 is being replenished.^[1]^[3]

Can the Mydata ATM 8 be moved to another machine position?

The Mydata ATM 8 can be removed and retrofitted into any position in the machine.^[1]^[3]

Not publicly documented

The following facts about the ATM 8 Tray Magazine are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the ATM 8 Tray Magazine are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the ATM 8 Tray Magazine are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the ATM 8 Tray Magazine are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the ATM 8 Tray Magazine are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the ATM 8 Tray Magazine is not on record.
Answerable by: an OEM datasheet or a fab qualification report