Juki
FX 3 RAL
The Juki FX 3 RAL is a pick-and-place machine. The Juki FX 3 RAL is configured with dual head placement, four tables, and six segments per head. The Juki FX 3 RAL uses 220 V / 60 Hz power.[1][2][3]
Where it fits in the process flow
What do the numbers mean?
Power & electrical2
Configuration & options11
What replaced it?
Alternatives
Tools documented as functional equivalents — same process step and wafer size, from a different manufacturer. Each equivalence cites its source.
- ASM Siplace SX— Same function class: Assembly / SMT, UnknownCompare in depthsource[3]
- Universal Instruments PEPP 1 DS 1— Same function class: Assembly / SMT, UnknownCompare in depthsource[3]
- Samsung CP 45 FU Neo— Same function class: Assembly / SMT, UnknownCompare in depthsource[3]
- Panasonic CM 602 L— Same function class: Assembly / SMT, UnknownCompare in depthsource[3]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the FX 3 RAL are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the FX 3 RAL are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the FX 3 RAL are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the FX 3 RAL are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the FX 3 RAL are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the FX 3 RAL is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]waferpedia.com — waferpedia.comwaferpedia.com
- [2]Juki FX 3 RAL family | Waferpedia — waferpedia.comwaferpedia.com
- [3]Inventory photo
- [4]2020 JUKI FX-3 RAL HIGH SPEED SMT PLACEMENT MACHINE | Used SMT Equipment — smtsalesgroup.comsmtsalesgroup.com
Last updated Oct 20, 2026.
Compare with similar tools
View all →
The Panasonic CM 602 L is a pick and place machine used in SMT assembly, with configurations including (8+3+DT) and (3+3) and vintage years 2006 and 2014.
The Samsung CP 45 FU Neo is a pick-and-place machine.
The Universal Instruments PEPP 1 DS 1 is a pick-and-place assembly machine.
The ASM Siplace SX is a pick-and-place machine with feeder carts, dual head and conveyor, and CP20A head type.