Logitech

CS30

Research Quality: 40% complete

What is it?

The CS30 Compact Trim Saw is described as a compact trim saw for thin section preparation. It is fitted with a 200 mm diameter diamond blade and a ceramic vacuum chuck that holds two slides while the blade cuts through the material. The source states it is suitable for thinning slide-mounted specimens down to 500 µm and lists geological-science applications such as trimming rock, concrete, fossils, and bone.

What can it run?

Process applications and technology nodes documented for this tool.

thin section preparation
thinning slide-mounted specimens down to 500 µm
trimming rock
trimming concrete
trimming fossils
trimming bone

What do the numbers mean?

Power & electrical1

Motor: 240/110V, 50/60Hz; 0.25kw belt drive^[1]

Dimensions & facilities2

Dimensions: 530 x 240 x 300mm^[1]
Net Weight: 30kg^[1]

Configuration & options2

Blade: 200mm diameter; 1.5mm thick; 22mm arbor; 1800 r.p.m^[1]
Slide Size: 2 of 28 x 48mm/26 x 46mm or 1 of 26 x 76mm^[1]

Interested in this tool?

Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

Motor240/110V, 50/60Hz; 0.25kw belt drive^[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Not publicly documented

The following facts about the CS30 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the CS30 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the CS30 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the CS30 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the CS30 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the CS30 is not on record.
Answerable by: an OEM datasheet or a fab qualification report