Nordson

4000 PXY

Research Quality: 30% complete

Provisional entry — research in progress

This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.

Nordson4000 PXY

No photo available yet

What it is

The Nordson 4000 PXY performs pull and shear testing, including cold bump pull, and is configured with a cartridge set for different test types.^[1]^[2]

How it works

The Nordson 4000 PXY includes a workholder for pull and shear testing and uses interchangeable cartridges, such as for cold bump pull, to adapt to different bond types.^[1]^[2]

Why won't it start?

Documented failure modes, common issues, and field considerations.

Missing microscope
Machine cannot be started

What do the numbers mean?

Power & electrical3

Power: Single phase^[2]
Frequency: 50/60 Hz^[2]
Voltage: 110 V / 230 V^[2]

Configuration & options9

Cold Bump Pull^[1]; With Cartridge Set^[1]
Make: Nordson / Dage^[1]
Model: 4000 PXY^[1]
Product type: Tester^[2]
Category: Test & Probe^[2]
Power rating: 250 VA^[2]
Power rating: 850 VA^[2]
Equipment type: Pull & Shear Tester^[3]

Interested in this tool?

Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

PowerSingle phase^[2]
Frequency50/60 Hz^[2]
Voltage110 V / 230 V^[2]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What types of testing does the Nordson 4000 PXY perform?

The Nordson 4000 PXY performs pull and shear testing, including cold bump pull.^[1]^[2]

What are the electrical requirements for the Nordson 4000 PXY?

The Nordson 4000 PXY requires single phase power, 50/60 Hz, 110 V / 230 V, with a power rating of 850 VA (some configurations 250 VA).^[2]

Not publicly documented

The following facts about the 4000 PXY are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 4000 PXY are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 4000 PXY are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 4000 PXY are not on record.
Answerable by: an engineer who operated it or OEM installation records
The process node or technology generation of the 4000 PXY is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the 4000 PXY are on record.
Answerable by: an OEM parts catalog or a service engineer