Struers
Abrapol 10
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Struers Abrapol 10 is an automatic polisher. The Struers Abrapol 10 has automatic dosage of lubricants and abrasives. The Struers Abrapol 10 is specified with 1.5 kW power and a 6-10 bar compressed air supply.[1][2]
What it is
General reference — not yet source-verifiedA polishing machine in this class removes material from a specimen surface in a controlled way to improve flatness and surface finish. Polishing machines of this class are commonly used in sample preparation workflows where a surface must be smoothed before inspection or analysis.
How it works
Where it fits in the process flow
General reference — not yet source-verifiedPolishing equipment of this class is used after sectioning and mounting when a prepared surface is needed for inspection or measurement. Polishing equipment of this class is used before microscopic examination, hardness evaluation, and other material characterization steps that depend on a smooth, damage-minimized surface.
Applications
General reference — not yet source-verifiedPolishing equipment of this class is used for materialographic sample preparation. Polishing equipment of this class is applied to specimens that need a refined surface for structural examination, defect review, or other laboratory analysis. Polishing equipment of this class can support work on metals, ceramics, minerals, and electronic materials when the goal is to reveal or preserve surface features for evaluation.
What do the numbers mean?
Configuration & options6
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the Abrapol 10 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Abrapol 10 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Abrapol 10 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Abrapol 10 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Abrapol 10 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Abrapol 10 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]Abrapol 10 — Struers | Specs, Sourcing & Service | Waferpedia — waferpedia.comwaferpedia.com
- [3]Struers Abrapol 10 family | Waferpedia — waferpedia.comwaferpedia.com
- [4]Phasen im Produklebenszyklus — struers.com (Oct 8, 2025)web.archive.org
Last updated Oct 17, 2026.
Compare with similar tools
View all →
The Logitech 1 DP 41 is a polisher with 3-phase, 50/60 Hz, 480 V, 12 amp electrical requirements.
The Strasbaugh 100R16 is a 1-spindle grinder/polisher with a DC drive system and 2 motors. The Strasbaugh 100R16 has a 16-inch capacity.
The Lapmaster 12 Benchtop Lapping / Polishing Machine is a bench-mounted single-sided lapping and polishing machine with a 12-inch plate diameter.
