Sumitomo
SE 75 DU Horizontal Injection
The Sumitomo SE 75 DU is a horizontal injection molding machine. The SE 75 DU provides 75 tons of clamping force. The SE 75 DU runs on 3-phase power at AC200V 50/60 Hz or AC220V 60 Hz.[1][2]
What it is
The Sumitomo SE 75 DU Horizontal Injection is a horizontal injection molding machine used in packaging and bonding applications.[1][2]
The Sumitomo SE 75 DU provides 75 tons of clamping force. The machine runs on three-phase power at AC200V 50/60 Hz or AC220V 60 Hz. The machine has an inverter rated 21.7 A and a heater rated 6.6 kW.[2][1]
How it works
Where it fits in the process flow
General reference — not yet source-verifiedIn semiconductor packaging, injection molding machines are used after die attach and wire bonding to encapsulate devices in molding compound. The molded package then proceeds to trim and form operations.
Applications
The machine can be used for semiconductor packages such as QFP and BGA, and for leadframe-based devices. The machine can also encapsulate MEMS and sensors.[2]
What do the numbers mean?
Power & electrical9
Vacuum & pumping2
Dimensions & facilities1
Configuration & options17
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Phase3 Phase[1]
- ConfigurationAC200V, 50/60 Hz[1]
- ConfigurationAC220V, 60 Hz[1]
- Power inputAC200V, 50/60 Hz[1]
- Power input (alternate)AC220V, 60 Hz[1]
- Max injection pressure30,780 psi[3]
- Electrical phase3 Phase[2]
- Voltage optionsAC200V, 50/60 Hz; AC220V, 60 Hz[2]
- Power3-phase[2]
- Voltage optionsAC200V 50/60 Hz or AC220V 60 Hz[2]
- Maximum injection pressure30,780 psi[2]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the SE 75 DU Horizontal Injection are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the SE 75 DU Horizontal Injection are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the SE 75 DU Horizontal Injection are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the SE 75 DU Horizontal Injection are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the SE 75 DU Horizontal Injection are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the SE 75 DU Horizontal Injection is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]waferpedia.com — waferpedia.comwaferpedia.com
- [3]plastiwin.com — plastiwin.complastiwin.com
Last updated Oct 13, 2026.
Compare with similar tools
View all →
Applied Materials model 0010-47763 is an ASSY ESC Bonded Monopolar Dual Heated unit.
The Applied Materials 0041-26723 is a bonded assembly used in semiconductor packaging and bonding applications.
The Logitech 1 WBS 1 is a wafer substrate bonder for 6-inch wafers.
