Axcelis
NV 8250 Ion
What it is
The Axcelis NV 8250 is an ion implanter designed for 8-inch wafers and classified as a mid-current implanter.[1]
Applications
General reference — not yet source-verifiedIon implanters are used in the fabrication of logic, memory, and power semiconductor devices for doping silicon substrates, including source/drain, well, and polysilicon gate doping.
Why won't it start?
Documented failure modes, common issues, and field considerations.
- 1 Edwards QDP 40 Pump
- Cryo Compressor
- Turbopump Extraction Power Supply and teslameter defect
What do the numbers mean?
Power & electrical8
Vacuum & pumping4
Wafer handling1
Configuration & options8
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Voltage208 VAC[1]
- Input Current55 Amps[1]
- Configuration50/60 Hz[1]
- Phase3 Phase[1]
- Full Load Current88 Amps[1]
- Max Load Current100 Amps[1]
- ConfigurationIncludes 1 Edwards QDP 40 Pump[1]
- Configuration1 Edwards QDP 40 Pump[1]
- ConfigurationCryo Compressor[1]
- ConfigurationTurbopump[1]
- ConfigurationExtraction Power Supply and teslameter defect[1]
- Frequency50/60 Hz[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Not publicly documented
The following facts about the NV 8250 Ion are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the NV 8250 Ion are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the NV 8250 Ion are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the NV 8250 Ion are not on record.
Answerable by: an engineer who operated it or OEM installation records
The process node or technology generation of the NV 8250 Ion is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the NV 8250 Ion are on record.
Answerable by: an OEM parts catalog or a service engineer
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]Inventory photo
Last updated Sep 1, 2026.
