Disco
DFD 651 Fully Automatic Dicing
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Disco DFD 651 Fully Automatic Dicing is a fully automatic dicing saw. The Disco DFD 651 Fully Automatic Dicing is equipped with dual 1000W synchro spindles. The Disco DFD 651 Fully Automatic Dicing includes an 8-inch universal chuck table.[1][2][3]
What it is
How it works
The Disco DFD 651 is equipped with dual 1000W synchro spindle hardware. The Disco DFD 651 includes macro/micro automatic alignment. The Disco DFD 651 includes non contact setup. The Disco DFD 651 includes a broken blade detector. The Disco DFD 651 includes motorized 360° theta control. The Disco DFD 651 includes a 12" monitor with camera. The Disco DFD 651 includes an 8" universal chuck table. The Disco DFD 651 includes a high pressure spinner cleaning unit.[1][2][3]
Where it fits in the process flow
General reference — not yet source-verifiedDicing equipment is used after wafer fabrication and usually after thinning or backgrinding when singulation is required. Dicing is commonly followed by die pick, inspection, sorting, packaging, or assembly operations.
Applications
General reference — not yet source-verifiedDicing saws are used to singulate semiconductor die and other microfabricated parts formed on wafers or panel-like substrates. Dicing saws in this class are also used for cutting brittle electronic materials where controlled kerf formation and positional accuracy are important.
What do the numbers mean?
Vacuum & pumping2
Wafer handling2
Optics & imaging4
Performance2
Control & software1
Configuration & options10
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What type of machine is the Disco DFD 651?
The Disco DFD 651 is a fully automatic dicing saw.[4][1][2][5]
Does the Disco DFD 651 include automatic alignment?
The Disco DFD 651 includes macro/micro automatic alignment.[1][2][3]
Not publicly documented
The following facts about the DFD 651 Fully Automatic Dicing are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the DFD 651 Fully Automatic Dicing are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the DFD 651 Fully Automatic Dicing are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the DFD 651 Fully Automatic Dicing are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the DFD 651 Fully Automatic Dicing are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the DFD 651 Fully Automatic Dicing is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (5)Every fact above is drawn from these public sources
- [1]gtsaz.com — gtsaz.comgtsaz.com
- [2]DFD 651 Fully Automatic Dicing — Disco | Specs, Sourcing & Service | Waferpedia — waferpedia.comwaferpedia.com
- [3]semistarcorp.com — semistarcorp.comsemistarcorp.com
- [4]Equipment inventory listing
- [5]Disco DFD 651 Fully Automatic Dicing Saw for sale — fabsurplus.comfabsurplus.com
Last updated Oct 17, 2026.
Compare with similar tools
View all →
The Lapmaster Model 15 is a bench-mounted unit with a rigid, lightweight, cast aluminum base, of the 'ring lapper' configuration, enabling high standards of flatness and surface finish.
The Blanchard 18 D Surface is a surface grinder used in Dicing & Grinding applications.
The Blanchard 20 36 Surface is a surface grinder used in dicing and grinding applications.
