Optorun
1300 Optical Thin
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
How it works
The OTFC series is based on ion-assisted technology. The OTFC series is used for producing AR coatings and optical filters such as edge filters and band pass filters. The OTFC series can use a center-driving or planetary substrate dome. The OTFC series can be configured with diffusion pumps plus Polycold or cryo pumps. The OTFC-1300CBI/DBI configuration uses a vacuum chamber built from SUS304. The OTFC-1300CBI/DBI configuration uses 2 EB sources. The OTFC-1300CBI/DBI configuration uses a 17 cm RF ion source. The OTFC-1300CBI/DBI configuration uses a high-precision optical monitor with a wavelength range of 350 nm to 1100 nm for reflection or transmittance measurement. The OTFC-1300CBI/DBI configuration also uses an XTC/3 crystal film thickness monitor with a 6-point rotary sensor. The OTFC-1300CBI/DBI configuration supports fully automated deposition control.[3]
Where it fits in the process flow
General reference — not yet source-verifiedOptical thin coaters are used after optical substrates have been fabricated, polished, and cleaned. Optical thin coaters add functional films before final inspection and later integration into optical assemblies or instruments.
Applications
The OTFC series is suitable for producing AR coatings and optical filters such as edge filters and band pass filters.[3]
Why won't it start?
Documented failure modes, common issues, and field considerations.
- Polycold Unit Defective
What do the numbers mean?
Optics & imaging2
Configuration & options5
- Polycold Unit Defective[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What type of equipment is the Optorun 1300 Optical Thin?
The Optorun 1300 Optical Thin is an optical thin coater.[2][1]
What deposition approach is used in the OTFC series?
The OTFC series is based on ion-assisted technology.[3]
What kinds of coatings is the OTFC series intended to produce?
The OTFC series is intended for producing AR coatings and optical filters such as edge filters and band pass filters.[3]
What vacuum system options are given for the OTFC-1300CBI/DBI?
The OTFC-1300CBI/DBI uses a vacuum system with a roughing pump and either 2 diffusion pumps plus Polycold or 2 cryo pumps plus a cryo trap.[3]
Not publicly documented
The following facts about the 1300 Optical Thin are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 1300 Optical Thin are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 1300 Optical Thin are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 1300 Optical Thin are not on record.
Answerable by: an engineer who operated it or OEM installation records
The process node or technology generation of the 1300 Optical Thin is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the 1300 Optical Thin are on record.
Answerable by: an OEM parts catalog or a service engineer
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]inventory listing
- [2]waferpedia.com — waferpedia.comwaferpedia.com
- [3]OTFC-1300 Optical Thin Film Coater | Allwin21 — allwin21.comallwin21.com
Last updated Oct 17, 2026.
Compare with similar tools
View all →
The OGP 0020 Contour Projector is a precision optics contour projector made by OGP (Optical Gaging Products).
The Perkin Elmer 1050 UV-VIS Spectrometer is an instrument used for analyzing ultraviolet and visible light absorption spectra.
The Agilent 11980 A is a fiber optic interferometer for precision optical measurements.