Waferpedia

Strasbaugh

7 AF Back

Dicing & GrindingStrasbaugh 7 AF Back family
Research Quality: 20% complete
7 AF Back — Inventory photo
Fig. 017 AF BackInventory photo[1]

Power

3 Phase[4]

Vacuum

Exhaust:[1]

What is it?

What do the numbers mean?

Power & electrical10

Phase
3 Phase[4]
Accurate?
Voltage
230 V[4]
Accurate?
Voltage
208 V[5]
Accurate?
Voltage
480V[1]
Accurate?
Electrical:[1]
Accurate?
Voltage
230 Vac / 208 Vac[1]
Accurate?
Phase
Three Phase, 60 Hz[1]
Accurate?
45 Full Load Amps (50 Hz available)[1]
Accurate?
208 Voltage[2]
Accurate?
Full Load Amps
45 A[2]
Accurate?

Vacuum & pumping5

25 SCFM at 90 PSI minimum (25 SCFM = 707,92 Liters Per Minute (L/min))[1]
Accurate?
Exhaust:[1]
Accurate?
250 CFM at 1/2-inch of water static pressure[1]
Accurate?
D.I. water; 6 GPM at 30 PSI minimum, 50 PSI maximum (6 gal/m = 1.3627 m³/h)[1]
Accurate?
Municipal or chilled water; 1 GPM at 30 PSI minimum, 80 PSI maximum (1 gpm = 3.7854 lpm)[1]
Accurate?

Dimensions & facilities2

Grinding area section 5200 LBS = 2’358 kg[1]
Accurate?
Handling area section 2300 LBS = 1’043 kg[1]
Accurate?

Configuration & options7

Can run 8" Silicon[1]
Accurate?
Utility Requirements:[1]
Accurate?
Clean Dry Air:[1]
Accurate?
one 5-inch duct (250 CFM = 424.7525m3/h)[1]
Accurate?
Grinding Coolant:[1]
Accurate?
Spindle Coolant:[1]
Accurate?
Industrial Waste:[1]
Accurate?
Interested in this tool?
Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

  • Phase3 Phase[4]
  • Voltage230 V[4]
  • Voltage208 V[5]
  • Voltage480V[1]
  • ConfigurationElectrical:[1]
  • Voltage230 Vac / 208 Vac[1]
  • PhaseThree Phase, 60 Hz[1]
  • Configuration45 Full Load Amps (50 Hz available)[1]
  • Configuration25 SCFM at 90 PSI minimum (25 SCFM = 707,92 Liters Per Minute (L/min))[1]
  • ConfigurationExhaust:[1]
  • Configuration250 CFM at 1/2-inch of water static pressure[1]
  • ConfigurationD.I. water; 6 GPM at 30 PSI minimum, 50 PSI maximum (6 gal/m = 1.3627 m³/h)[1]
  • ConfigurationMunicipal or chilled water; 1 GPM at 30 PSI minimum, 80 PSI maximum (1 gpm = 3.7854 lpm)[1]
  • Configuration208 Voltage[2]
  • Full Load Amps45 A[2]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Not publicly documented

The following facts about the 7 AF Back are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

  • No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 7 AF Back are on record.

    Answerable by: OEM historical records or a trade-press announcement

  • No publicly documented variants, configuration options, or revision breakpoints of the 7 AF Back are on record.

    Answerable by: an OEM product catalog or an engineer who ordered or specified the tool

  • The control-system platform and OS era of the 7 AF Back are not on record.

    Answerable by: an engineer who operated it or OEM installation records

  • No publicly documented failure modes or field errata for the 7 AF Back are on record.

    Answerable by: a field service engineer, process engineer, or maintenance technician

  • The process node or technology generation of the 7 AF Back is not on record.

    Answerable by: an OEM datasheet or a fab qualification report

No research found yet — worked with this tool? Share what you know.

Sources & citations

Sources (7)Every fact above is drawn from these public sources
  1. [1]Inventory photo
  2. [2]Inventory photo
  3. [3]Inventory photo
  4. [4]inventory listing
  5. [5]inventory listing
  6. [6]Equipment inventory listing
  7. [7]Equipment inventory listing
Was this page accurate?

Last updated Jul 29, 2026.

Compare with similar tools

View all →