West Bond
7700 E 79
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The West Bond 7700 E 79 is a bonder for gold wires ranging from 0.0007" to 0.002". The West Bond 7700 E 79 includes a heated work holder with digital control. The West Bond 7700 E 79 is specified for 115V, 50/60 Hz, 10A.[1][2]
What it is
The West Bond 7700 E 79 is a bonder in the packaging and bonding category. The West Bond 7700 E 79 is configured for gold wires ranging from 0.0007 inch to 0.002 inch. The West Bond 7700 E 79 has a heated work holder with digital control. The West Bond 7700 E 79 operates from 115V, 50/60 Hz, at 10A.[1][2]
How it works
General reference — not yet source-verifiedWire bonders use a bonding tool to place and attach fine wire from one bond pad to another connection point under controlled force, motion, and heat. A heated work holder stabilizes the part temperature during bonding. Digital control is used to manage machine settings and bonding operation.
Where it fits in the process flow
General reference — not yet source-verifiedPackaging and bonding tools are used after wafer fabrication when singulated devices, substrates, or package parts need electrical interconnection. Wire bonding commonly follows die attach and generally precedes encapsulation, lid seal, or final electrical test, depending on the assembly flow.
Applications
What do the numbers mean?
Power & electrical1
Control & software2
- Heated work holder with digital control[1]
Configuration & options3
- Gold wires ranging from 0.0007” to 0.002”[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Voltage115V, 50/60 Hz, 10A[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What type of equipment is the West Bond 7700 E 79?
The West Bond 7700 E 79 is a bonder in the packaging and bonding category.[1][2]
What wire range does the West Bond 7700 E 79 support?
The West Bond 7700 E 79 is configured for gold wires ranging from 0.0007 inch to 0.002 inch.[1][2]
Not publicly documented
The following facts about the 7700 E 79 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 7700 E 79 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 7700 E 79 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 7700 E 79 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 7700 E 79 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 7700 E 79 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]inventory listing
- [2]7700 E 79 — West Bond | Specs, Sourcing & Service | Waferpedia — waferpedia.comwaferpedia.com
Last updated Oct 16, 2026.
Compare with similar tools
View all →
Applied Materials model 0010-47763 is an ASSY ESC Bonded Monopolar Dual Heated unit.
The Applied Materials 0041-26723 is a bonded assembly used in semiconductor packaging and bonding applications.
The Logitech 1 WBS 1 is a wafer substrate bonder for 6-inch wafers.
