YES
450 PB 8-2 P-CP Polyimide
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
The YES 450 PB 8-2 P-CP is a polyimide bake oven. The YES 450 PB 8-2 P-CP is specified for 208 Vac, 3 phase, and 60 Hz power.[1]
How it works
General reference — not yet source-verifiedA polyimide bake oven heats substrates according to a defined thermal recipe inside an enclosed process chamber. The bake step promotes solvent removal and film stabilization so the coating can better withstand subsequent processing.
Where it fits in the process flow
General reference — not yet source-verifiedPolyimide bake ovens sit in the thermal portion of the wafer process flow after a polyimide coating step and before later lithography, etch, deposition, bonding, or packaging operations, depending on the integration scheme. The bake step is used to condition the film so later process steps act on a more stable layer.
Applications
General reference — not yet source-verifiedPolyimide bake ovens are used for processes that employ polyimide as an insulating, protective, stress-buffering, or planarizing film. Polyimide bake ovens are also used in microelectronic and related substrate fabrication where coated wafers or similar workpieces require thermal treatment after coating.
What do the numbers mean?
Power & electrical4
Configuration & options5
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What type of equipment is the YES 450 PB 8-2 P-CP?
The YES 450 PB 8-2 P-CP is a polyimide bake oven.[1]
Not publicly documented
The following facts about the 450 PB 8-2 P-CP Polyimide are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 450 PB 8-2 P-CP Polyimide are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 450 PB 8-2 P-CP Polyimide are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 450 PB 8-2 P-CP Polyimide are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 450 PB 8-2 P-CP Polyimide are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 450 PB 8-2 P-CP Polyimide is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]Inventory photo
Last updated Oct 17, 2026.
Compare with similar tools
View all →The Blue M 0 500 is an oven manufactured by Blue M, with asset number 139866.
The Varian 0332 F 9453 302 Diffusion is a diffusion pump.