Manufacturer
MPI
Looking for practical guidance on MPI? The reference remains the primary source; requests are private, the network is growing, and a relevant match is not guaranteed.
26 entries
- MP36PH-3CMPI
The MPI MP36PH-3C is a diesel-electric passenger locomotive in the MPI MPXpress line built by MotivePower.
Categorydiesel-electric passenger locomotiveDiscontinued - MP40PH-3CMPI
The MP40PH-3C is an MPI MPXpress diesel-electric passenger locomotive with a 4,000 hp EMD 16-710G3B-T2 prime mover.
CategoryPassenger locomotivesNodeMPI MP40PH-3CDiscontinued - MP54ACMPI
The MPI MP54AC is a diesel-electric passenger locomotive in the MPXpress family, designed to meet EPA Tier 4 emissions standards and provide higher performance than the MP40PH-3C.
CategoryPassenger locomotiveLatest locomotive in the MPXpress family - Leda 8 F 3 G Plus V 110MPI
The MPI Leda 8 F 3 G Plus V 110 is a probe station with a 5 inch diameter vacuum chuck, four probe manipulators, a StereoZoom microscope, and 110V power at 50/60 Hz.
CategoryTest & Probe - MP40PHTC-T4ACMPI
The MPI MP40PHTC-T4AC is also known as the MP54AC, a genset diesel-electric passenger locomotive in the MPXpress family.
CategoryPassenger locomotiveLatest model - TS 3500 Automatic WaferMPI
General referenceThe MPI TS 3500 Automatic Wafer is an automatic wafer probing system designed for semiconductor device testing, functioning as a precision interface between the wafer and test instrumentation.
CategoryTest & ProbeWaferWafer ID Reader - Skywalker S 6 WaferMPI
The MPI Skywalker S 6 Wafer is a wafer prober for 6-inch wafers.
CategoryTest & Probe - Capella FP 60 ML Flip ChipMPI
The MPI Capella FP 60 ML is a semi-automatic flip chip prober.
CategoryTest & Probe - MP36PH-3SMPI
The MPI MP36PH-3S is a diesel-electric passenger locomotive built by MotivePower, using an EMD 16-645F3B prime mover and rated at 3,600 hp.
Categorydiesel-electric passenger locomotiveLegacy - M 76 FDMPI
The MPI M 76 FD is a sorter.
CategoryTest & Probe - TA 5000 Temperature ForcingMPI
The MPI TA 5000 is a temperature-forcing system for semiconductor and electronic-device thermal testing.
- TS 300 AMPI
- TS 3000MPI
The MPI TS 3000 is a 300 mm automated probe system for on-wafer applications. The MPI TS 3000 supports DC-IV, DC-CV, pulsed-IV, RF, mmW, load-pull, and failure-analysis use cases.
- TA 5000 Air ForcingMPI
- M 60 DMPI
- LEDA 6 SFA Automatic WaferMPI
The MPI LEDA 6 SFA Automatic Wafer is a Test & Probe wafer prober.
CategoryTest & Probe - Leda 8 FMPI
The MPI Leda 8 F Prober is a semiconductor wafer prober manufactured by MPI.
CategoryTest & Probe - TaperMPI
MPI Taper is a semi-automatic prober with a listed wafer size of 6 inch.
CategoryTest & Probe - TS2000-IFEMPI
The MPI TS2000-IFE is a 200-mm automated probe station with micron precision used in a terahertz small-signal probe station configuration.
CategoryTest & ProbeWafer200mm - W 1 WaferMPI
The MPI W 1 Wafer is a semi-automatic wafer prober configured for VCSEL NFT sorting and includes a chiller, with a vintage of 2019.
CategoryTest & Probe - MP32PH-QMPI
The MPI MP32PH-Q is an MPI MPXpress passenger locomotive model rebuilt and refurbished for SunRail from previously operated GP40WH-2 units.
CategoryPassenger locomotiveDiscontinued - ThermalAir TA 5000 A Temperature ForcingMPI
The MPI ThermalAir TA 5000 A Temperature Forcing System is a temperature forcing system with continuous air flow up to 25 SCFM and a temperature range from -80°C to +225°C.
- LED A 3 GP 4 GMPI
The MPI LED A 3 GP 4 G is a semi-automatic prober.
CategoryTest & Probe - TS150MPI
The MPI TS150 Probe Station is designed for electrical testing on wafers or chips and supports wafers up to 6 inch.
CategoryTest & ProbeWafer6" - PM100MPI
The MPI TS150 Probe Station is an electrical test probe station for wafers or chips, using MPI PM100 true X,Y,Z micro-positioners for probe mounting.
CategoryTest & ProbeWafer6" - TA 5000 A Temperature ForcingMPI
The MPI TA 5000 A is a temperature forcing system.
