Tektronix

The Tektronix 4012 is a text-and-graphics computer terminal in the Tektronix 4010 series that added lower case characters to the base 4010 model.

The Tektronix 4015 is a Tektronix 4014 with the APL character set card from the 4013.

The Tektronix MDO 3024 Oscilloscope is a 200 MHz, 4-channel oscilloscope.

The Sony/Tektronix 314 is a portable 10 MHz dual-trace CRT storage oscilloscope introduced in 1975.

The Tektronix 4911 is a text-and-graphics computer terminal that uses storage-tube technology, introduced in 1972.

The Tektronix 4923 is a storage device for the Tektronix 4010 series terminals, based on the 3M DC300 digital tape system.

The Tektronix 4903 Interactive Graphic Unit draws crosshairs on the Tektronix 4002 display, enabling users to select points and input coordinates to a computer.

The Tektronix TDS 410 is a portable digitizing oscilloscope with two input channels, 150 MHz analog bandwidth, and a maximum digitizing rate of 100 Megasamples per second.

The Tektronix AWG 70001 B is a single-channel arbitrary waveform generator in the AWG70000B series. The Tektronix AWG 70001 B is specified for sample rates up to 50 GS/s and direct generation of wideband signals up to 20 GHz.

The Tektronix DSA 8200 Digital Serial Analyzer is a modular sampling oscilloscope for communication signal analysis, TDR/TDT, and serial data network analysis.

The Tektronix 4054 is a desktop unit from the Tektronix 4050 series that combines the 4014 screen with the 4052 logic.

The Tektronix DPO 5204 B is a 2 GHz, 4-channel digital phosphor oscilloscope with a 10/5 GS/s sample rate and 50 M/25 M record length.

The Tektronix 530 was part of the 530 series oscilloscopes introduced in the late 1950s.

The Tektronix 321A is a transistorized oscilloscope with a dc-to-6 MHz bandwidth and battery, external dc, or 115 V AC operation.

Tektronix Model 453 is a 50 MHz portable oscilloscope introduced as part of Tektronix's 400 series.

The Tektronix 4912 is a cassette tape memory for the 4010 Series terminals.

The Tektronix 4052 is a self-hosted desktop computer terminal in the Tektronix 4050 series, based on the 4010 display with a 16-bit processor.

The Tektronix 8000 is a microprocessor development system that runs editors and cross-compilers and uses twin floppy disk storage.

The Tektronix 4002A is a text-and-graphics computer terminal introduced in 1971 as an updated version of the Tektronix 4002, using storage-tube display technology.

Tektronix RSA 3303 A is a real-time spectrum analyzer with a DC to 3 GHz range.

The Tektronix TDS 8000 is a digital sampling oscilloscope with DC to 50 GHz bandwidth, modular architecture supporting up to eight channels, and a sample interval of 10 femtoseconds.

The Tektronix TDS 1002 is a two-channel digital storage oscilloscope.

The Tektronix 177 is the standard test fixture for the 577 curve tracer, produced from 1972 to 1993.

The Tektronix DTG 5334 is a data timing generator mainframe with a maximum data rate of 3.35 Gb/s and a modular architecture that accepts plug-in output modules.

The Tektronix TM 5006 Test Measurement is a Test & Probe system. The Tektronix TM 5006 Test Measurement is configured with a PS 5010 Programmable Power Supply, an FG 5010 Programmable Function Generator, and Option 12 with an SI 5010 Programmable Scanner.

The Tektronix 2465A Oscilloscope is a Tektronix oscilloscope model identified in a Tektronix service manual and a product page.

The TDS 540 is a 500 MHz, 1 GS/s quad-channel digital oscilloscope introduced in 1992.

The Tektronix 2213A is a dual-channel 60 MHz oscilloscope with calibrated deflection from 2 mV/division to 5 V/division and sweep speeds from 0.5 s/division to 5 ns/division.

The Tektronix 11 A 34 is a four channel amplifier.

The Tektronix 485 is a portable, dual-channel wide-band oscilloscope with selectable input impedance, providing up to 350 MHz bandwidth in 50 Ω mode and 250 MHz in 1 MΩ mode.

The Tektronix 2235 is an oscilloscope with a Tektronix service manual for performance checking, adjustment, and servicing, and a Tektronix operator's instruction manual for operation and installation.

The Tektronix TLA 7016 is a benchtop logic analyzer mainframe by Tektronix.

The Tektronix A 6901 is a ground isolation monitor manufactured by Tektronix.

The Tektronix 454 is a 150 MHz analog oscilloscope that used distributed deflection elements and T-coil peaking.

The Tektronix P 6248 is a prober.

Tektronix MDO 56 B is an equipment model identified by model designation MDO 56 B.

The Tektronix 370 A Programmable Curve Tracer is a high-resolution DC parametric characterization instrument for semiconductor devices.

The Tektronix P 7330 is a differential probe.

The Tektronix 2465 B Oscilloscope is a four-channel portable oscilloscope with 400 MHz bandwidth.

The Tektronix DSA 602 is a digitizing signal analyzer.

The Tektronix TDS 3012 B is a 2-channel digital oscilloscope.

The Tektronix TDS 5104 B Oscilloscope is a 4-channel digital phosphor oscilloscope with 1 GHz analog bandwidth and up to 5 GS/s real-time sample rate.

The Tektronix PPG 3202 is a programmable pattern generator with a data rate of 32 Gb/s.

The Tektronix P 6139 A Voltage Probe is a 500 MHz probe with 8 pF capacitance and 10 MOhm resistance, rated for 300 V.

The Tektronix T922 is a 15 MHz dual channel analog oscilloscope.

The Tektronix AWG 7102 Arbitrary Waveform is an arbitrary waveform generator in the Tektronix AWG7000 series. The Tektronix AWG 7102 Arbitrary Waveform supports 10 GS/s sampling, and the AWG7102 Option 06 supports interleave operation from 10 GS/s to 20 GS/s.

Tektronix TDS 6804 B is a 4-channel digital oscilloscope with 8 GHz bandwidth and 20 GS/s sampling rate.

The Tektronix 4662 Interactive Digital Plotter is a GPIB-based pen plotter that can be driven by a properly equipped Tektronix 4014 terminal through an expansion card, offering color graphical output via colored pen selection.