Tektronix
DPO 73304 SX Oscilloscope
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Tektronix DPO 73304 SX Oscilloscope is a DPO70000SX Series oscilloscope. The Tektronix DPO 73304 SX Oscilloscope provides 2 channels at 33 GHz or 4 channels at 23 GHz. The Tektronix DPO 73304 SX Oscilloscope provides 100 GS/s on 2 channels or 50 GS/s on 4 channels.[1]
.svg){kind=logo}
What it is
How it works
Where it fits in the process flow
The DPO 73304 SX provides acquisition performance similar to the DPO73304DX bench model in a compact instrument form factor.[1]
Applications
What do the numbers mean?
Power & electrical5
- Input coupling
- TekConnect channels: DC, 50 ohms to a programmable termination voltage, or ground; ATI channel: DC, 50 Ω[1]
- Maximum input voltage
- TekConnect channels: up to ±8 V depending on settings; ATI channel: ±0.75 Vpk; Aux channel: ±5.0 Vpk[1]
- Displayed average noise level
- ≤ -145 dBm/Hz to ≤ -150 dBm/Hz depending on frequency range[1]
Optics & imaging2
Control & software1
Configuration & options25
- Sensitivity range
- TekConnect channels: 62.5 mVFS to 6 VFS; ATI channel: 100 mVFS to 300 mVFS[1]
- Channel isolation
- TekConnect channels in an ATI unit: 60 dB; TekConnect to ATI channel: 55 dB to 27 dB depending on frequency; ATI channel to TekConnect channels: 55 dB to 60 dB depending on frequency[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Sensitivity Range62.5 mV FS to 6 V FS[1]
- Input couplingTekConnect channels: DC, 50 ohms to a programmable termination voltage, or ground; ATI channel: DC, 50 Ω[1]
- Maximum input voltageTekConnect channels: up to ±8 V depending on settings; ATI channel: ±0.75 Vpk; Aux channel: ±5.0 Vpk[1]
- Bandwidth limit70 GHz to 1 GHz in 1 GHz steps, or 500 MHz; 5 GHz steps above 35 GHz[1]
- Displayed average noise level≤ -145 dBm/Hz to ≤ -150 dBm/Hz depending on frequency range[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What analog bandwidth is specified for the Tektronix DPO 73304 SX?
The Tektronix DPO 73304 SX has 33 GHz analog bandwidth.[2]
What sample rate is specified for the Tektronix DPO 73304 SX?
The Tektronix DPO 73304 SX has a sample rate of up to 100 GS/s.[2]
How many acquisition channels and what performance modes are given for the DPO 73304 SX?
The DPO 73304 SX provides two channels at 33 GHz and 100 GS/s acquisition or four channels at 23 GHz and 50 GS/s real time acquisition performance.[1]
What acquisition architecture does the DPO70000SX Series use?
The DPO70000SX Series uses patented Asynchronous Time Interleaving architecture for real time signal acquisition.[1]
Not publicly documented
The following facts about the DPO 73304 SX Oscilloscope are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the DPO 73304 SX Oscilloscope are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the DPO 73304 SX Oscilloscope are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the DPO 73304 SX Oscilloscope are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the DPO 73304 SX Oscilloscope are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the DPO 73304 SX Oscilloscope is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]trsrentelco.com — trsrentelco.comtrsrentelco.com
- [2]inventory listing
- [3]finaltest.netfinaltest.net
Last updated Oct 16, 2026.
Compare with similar tools
View all →The ABM-407B-2-S-CE-S293 is a robot.