Accretech
MHF 9000 EX Test Head Manipulator
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Accretech / TSK MHF 9000 EX Test Head Manipulator is a test head manipulator in the Test & Probe category. The Accretech / TSK MHF 9000 EX Test Head Manipulator operates at 210 V, single phase, 50/60 Hz.[1][2]
What it is
The Accretech / TSK MHF 9000 EX is a test head manipulator. The Accretech / TSK MHF 9000 EX is categorized under Test & Probe.[2]
How it works
Where it fits in the process flow
General reference — not yet source-verifiedTest head manipulators fit into back-end electrical test operations. Test head manipulators are used where automated test equipment must be mechanically coupled to probers for wafer test or to handlers for packaged-device test.
In a test cell, a test head manipulator sits alongside the tester and adjacent contact equipment. A test head manipulator supports alignment and connection steps that occur before electrical measurements begin and during changeovers between test setups.
Applications
General reference — not yet source-verifiedTest head manipulators are used in semiconductor device test environments that require repeated connection of heavy tester heads to contact hardware. Test head manipulators help maintain stable positioning during docking, undocking, and service access around the test interface.
What do the numbers mean?
Power & electrical5
Configuration & options3
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the MHF 9000 EX Test Head Manipulator are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the MHF 9000 EX Test Head Manipulator are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the MHF 9000 EX Test Head Manipulator are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the MHF 9000 EX Test Head Manipulator are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the MHF 9000 EX Test Head Manipulator are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the MHF 9000 EX Test Head Manipulator is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]waferpedia.com — waferpedia.comwaferpedia.com
Last updated Oct 16, 2026.
Compare with similar tools
View all →The Tenney TPS JR-A-F4T is a junior compact temperature test chamber with a 1.2 cubic foot chamber size and a temperature range of -68°C to +180°C.
The Rorze 03 RR 8120-001-001 is a wafer exchanger for 8-inch wafers.
The KLA 1007 is a wafer prober manufactured by KLA.