Accretech

UF 200 S

Test & Probe 200mm Accretech UF 200 family

Research Quality: 30% complete

LinkedIn X Email

UF 200 S — Inventory photo — Fig. 01UF 200 SInventory photo^[1]

Wafer size

200mm

Power

208 VAC, Single Phase^[1]

Vacuum

Over -53K MPa^[1]

What is it?

The Accretech / TSK UF 200 S is a prober for 8-inch wafers, with sources also stating it was configured for 8-inch (200mm) operation.

Why won't it start?

Documented failure modes, common issues, and field considerations.

Not operational due to control board failure.

What do the numbers mean?

Power & electrical2

Voltage: 208 VAC, Single Phase^[1]
Full Load AMPS: 7.2A^[1]

Vacuum & pumping2

Vacuum: Over -53K MPa^[1]
Air Supply Source Pressure: 0.45Mpa or more^[1]

Wafer handling3

Loader, Wafer Handling: Backside Holding^[1]
Wafer Size: 5",6",8", Currently 8"(200mm) Configured^[1]; HOT Chuck^[1]

Control & software1

GPIB Interface^[1]

Accurate?

Dimensions & facilities1

Weight (Main Body): 900kg (Standard)^[1]

Configuration & options11

Air: Over 0.45 MPa^[1]
Frequency: 50/60Hz^[1]
Wiring Configuration: 2Wire + Ground^[1]
Main Breaker Rating: 10A^[1]
Interrupt Current: 10KA A.I.C^[1]
Diagram Number: FE06000^[1]; Yield Check Function^[1]; FAIL Check Function^[1]
X/Y axis: Probing Area(±120mm), Maximum Speed(200m/s)^[1]
Power Consumption: Approximately 1.5kVA^[1]
Manipulator: MHF300L^[1]

Interested in this tool?

Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

VacuumOver -53K MPa^[1]
Voltage208 VAC, Single Phase^[1]
Full Load AMPS7.2A^[1]
Air Supply Source Pressure0.45Mpa or more^[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Not publicly documented

The following facts about the UF 200 S are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the UF 200 S are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the UF 200 S are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the UF 200 S are not on record.
Answerable by: an engineer who operated it or OEM installation records
The process node or technology generation of the UF 200 S is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the UF 200 S are on record.
Answerable by: an OEM parts catalog or a service engineer