Agilent

8714 ET Network Analyzer

Research Quality: 40% complete

Provisional entry — research in progress

This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.

The Agilent 8714 ET Network Analyzer is a network analyzer. The Agilent 8714 ET Network Analyzer operates up to 3,000 MHz. The Agilent 8714 ET Network Analyzer is model 8714 ET.^[1]^[2]

8714 ET Network Analyzer — Inventory photo — Fig. 018714 ET Network AnalyzerInventory photo^[1]

How it works

The Agilent 8714 ET Network Analyzer was used for reflection measurement in antenna work. The Agilent 8714 ET Network Analyzer was also used in an instrumentation setup that measured dielectric constant and loss factor with a custom-made probe.^[3]^[4]

Applications

The Agilent 8714 ET Network Analyzer was used to measure return loss for a textile antenna. The Hewlett Packard 8714 ET Network Analyzer was also used in dielectric property measurements of ground beef at 27.12 MHz with a custom-made probe.^[3]^[4]

What do the numbers mean?

Power & electrical2

Up to 3,000 MHz^[1]
Frequency range: Up to 3,000 MHz^[1]

Configuration & options2

Equipment type: Network analyzer^[2]
Model designation: 8714 ET^[2]

Interested in this tool?

Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

ConfigurationUp to 3,000 MHz^[1]
Frequency rangeUp to 3,000 MHz^[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What is the Agilent 8714 ET?

The Agilent 8714 ET is a network analyzer.^[2]^[1]

Has the Agilent 8714 ET been used for antenna reflection measurements?

The Agilent 8714 ET Network Analyzer was used for reflection measurement and return-loss measurement of a textile antenna.^[3]

Has the 8714 ET been used in dielectric-property measurements?

The Hewlett Packard 8714 ET Network Analyzer was used with a custom-made probe to measure dielectric constant and loss factor in ground beef at 27.12 MHz.^[4]

Not publicly documented

The following facts about the 8714 ET Network Analyzer are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 8714 ET Network Analyzer are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 8714 ET Network Analyzer are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 8714 ET Network Analyzer are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 8714 ET Network Analyzer are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 8714 ET Network Analyzer is not on record.
Answerable by: an OEM datasheet or a fab qualification report

No research found yet — worked with this tool? Share what you know.

Sources & citations

Sources (4)Every fact above is drawn from these public sources

[1]Inventory photo
[2]waferpedia.com — waferpedia.comwaferpedia.com
[3]https://biblio.ugent.be/publication/389478/file/585055.pdf — biblio.ugent.bebiblio.ugent.be
[4]https://www.frontiersin.org/articles/10.3389/frfst.2022.960471/pdf — frontiersin.orgfrontiersin.org