Bruker
D8D
Bruker D8D is an XRD system. Bruker D8D has a Bragg-Brentano parafocusing setup for powder analysis. Bruker D8D supports in situ heating analysis for bulk and powder samples.[1]
What it is
How it works
Where it fits in the process flow
The Bruker D8D supports powder analysis and is used for in situ heating analysis for bulk and powder samples.[1]
Applications
The Bruker D8D is used for phase composition, crystal structure, and orientation analysis.[1]
The Bruker D8D is used for powder, thin film, bulk, and colloidal samples.[1]
- powder analysis
- in situ heating analysis for bulk and powder samples
What do the numbers mean?
Gas & chemistry2
Optics & imaging2
Configuration & options37
- instrument context
- Listed under nanoFAB surface spectroscopy and X-ray diffraction capabilities[1]
- Sample types
- Powder, thin film, bulk, and colloidal samples at ambient and non-ambient conditions[1]
- Advanced techniques
- Non-Coplanar Scan, Pole Figure, 2D Stress Measurement, and Multi-Angle Scattering[3]
- Advanced XRD techniques
- Non-Coplanar Scan, Pole Figure, 2D Stress Measurement, and Multi-Angle Scattering[3]
- Applications
- phase composition, particle size, crystal structure, and orientation analysis[1]
- Applications
- phase composition, particle size, crystal structure, orientation, XRR, GI-SAXS/WAXS, pole figure, residual stress analysis[1]
- Bragg-Brentano parafocusing setup for powder analysis[1]
- Bragg-Brentano parafocusing setup[1]
- Capabilities
- Analysis of phase composition, particle size, crystal structure, and orientation[1]
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| Bruker D8D Plus | — | — | Base model named in the source with D8D Plus as the full designation. | nanofab.ualberta.ca[1] |
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What sample types can the Bruker D8D analyze?
The Bruker D8D is used for powder, thin film, bulk, and colloidal samples.[1]
What structural information can the Bruker D8D provide?
The Bruker D8D is used to analyze phase composition, crystal structure, and orientation.[1]
Does the Bruker D8D support automated measurements?
The Bruker D8D uses a multi-sample stage with automated acquisition.[1]
Can the Bruker D8D be used for heating experiments?
The Bruker D8D supports in situ heating analysis for bulk and powder samples.[1]
Not publicly documented
The following facts about the D8D are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the D8D are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the D8D are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the D8D are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the D8D is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the D8D are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]nanofab.ualberta.ca — nanofab.ualberta.cananofab.ualberta.ca
- [2]Inventory photo
- [3]nanofab.ualberta.ca — nanofab.ualberta.cananofab.ualberta.ca
Last updated Oct 20, 2026.
Compare with similar tools
View all →The KLA .204 PSL Wafer is an 8-inch NIST-traceable reference wafer compatible with Surfscan 6xy0 and Sp1 particle counters.
KLA .496 PSL Wafer is an 8-inch NIST traceable wafer stated to be capable on Surfscan 6xy0 and SP1.
The KLA .498 PSL Wafer is a NIST traceable reference wafer.
