Bruker
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Bruker Dimension Edge is an atomic force microscope used for nanoscale metrology and inspection. It is a scanning probe microscope platform for measuring surface topography and nanomechanical properties.
This instrument fits in metrology and inspection after sample preparation and before decisions that depend on surface quality or mechanical response. It is used to examine small-scale surface features that are not visible with conventional optical inspection.
The instrument is used for nanoscale surface topography, roughness, step height, and nanomechanical measurements. It can also support force-based studies of adhesion and stiffness.[1]
Be the first to add cited specifications for this tool.
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
No research found yet — worked with this tool? Share what you know.
It provides nanoscale measurements of surface topography such as roughness and step height, as well as nanomechanical properties.[1]
The scan range is 90 μm by 90 μm, and the vertical noise floor is less than 50 pm RMS.[1]
It accepts samples up to 150 mm in diameter and 15 mm thick.[1]
Single point spectroscopy is used to obtain force curves for quantitative measurement of mechanical properties such as adhesion and stiffness, also described as modulus.[1]
The following facts about the Dimension Edge are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No specifications for the Dimension Edge are on record.
Answerable by: an OEM datasheet, a cleanroom equipment inventory, or an engineer who operated or installed it
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Dimension Edge are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Dimension Edge are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Dimension Edge are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Dimension Edge are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
No research found yet — worked with this tool? Share what you know.
Last updated Jul 29, 2026.
The KLA .204 PSL Wafer is an 8-inch NIST-traceable reference wafer compatible with Surfscan 6xy0 and Sp1 particle counters.
KLA .496 PSL Wafer is an 8-inch NIST traceable wafer stated to be capable on Surfscan 6xy0 and SP1.
The KLA 0035235-003 MMD Head is a TSTD PCB ASSY, MMD MEAS HEAD compatible with the KLA AIT-XP.