Cascade Microtech
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Cascade Microtech 150 is used for a variety of electrical tests including DC parametric characterization, low-frequency noise measurements, and S-parameter measurements up to millimeter-wave and terahertz frequencies.[1]
The probe station can be used for cryogenic probing and for measurements under magnetic fields.[1]
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
No research found yet — worked with this tool? Share what you know.
The Cascade Microtech 150 supports 150 mm wafers.[2]
The Cascade Microtech 150 is a manual open probe station.[2]
The Cascade Microtech 150 is used for DC parametric, S-parameter, and low-frequency noise measurements, as well as for terahertz probing and cryogenic/magnetic probing.[1]
The following facts about the 150 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
Fewer than 3 independently cited specifications for the 150 are on record; the remainder await public documentation.
Answerable by: an OEM datasheet, a cleanroom equipment inventory, or an engineer who operated or installed it
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 150 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 150 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 150 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 150 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
No research found yet — worked with this tool? Share what you know.
Last updated Aug 13, 2026.
The GCA 3696 is a step-and-repeat camera (photorepeater) built around a DEC PDP-11/04 minicomputer.
The KLA .498 PSL Wafer is a NIST traceable reference wafer.