Disco
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Disco DCS 1440 is an automatic cleaning system used to clean workpieces that have been cut on a dicing saw. The DCS 1440 supports workpiece sizes up to 250 mm square or 200 mm round. The DCS 1440 offers high-pressure cleaning and an optional atomizing cleaning nozzle, and includes a space-saving design with a width of 400 mm.[1]
The Disco DCS 1440 is an automatic cleaning system designed to clean workpieces that have been cut on a dicing saw. The DCS 1440 is a model in Disco’s DCS series of cleaning equipment. The system supports workpiece sizes up to 250 mm by 250 mm and can also handle multilayer substrates. The machine has a footprint of 400 mm width by 600 mm depth by 1,220 mm height and weighs approximately 130 kg. The DCS 1440 is equipped with a 4-inch LCD touch panel for operation and uses a spinner table that rotates at speeds from 100 min⁻¹ to 3,000 min⁻¹.[1]
The DCS 1440 cleans workpieces by spinning them on a table while a cleaning arm sweeps across the surface. Two cleaning methods are available: high pressure cleaning and atomizing cleaning. High pressure cleaning directs a jet of water at pressures between 2.0 MPa and 11.8 MPa against the workpiece. Atomizing cleaning generates a mist by mixing fluid droplets with compressed air, and the mist is sprayed at high speed onto the surface; the shockwave and expansion wave from the impact remove particles with minimal damage. The atomizing nozzle is an optional specification. The system can be configured with a double cleaning arm, mounting both nozzle types, to handle a wider range of workpieces. Cleaning sequences are programmable, allowing the operator to set sweep speed and cleaning locations. Up to eight different cleaning sequences can be saved and recalled.[1]
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| DCS1460 | — | — | Max workpiece size: ø300 mm / 310 mm square; machine width: 500 mm; machine weight: approx. 150 kg; power consumption during cleaning: 1000 W | epfl.ch[1] |
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
No research found yet — worked with this tool? Share what you know.
The DCS 1440 supports workpiece sizes up to 200 mm diameter round wafers and 250 mm square substrates.[1]
The DCS 1440 offers high pressure cleaning as standard. Atomizing cleaning is available as an optional specification. Both nozzle types can be mounted together in a double cleaning arm configuration.[1]
The DCS 1440 requires a 200–240 V AC, 3-phase power supply. Maximum power draw is 2.6 kVA; power consumption during cleaning is 390 W and during standby is 110 W.[1]
Compatible tape frames include DTF2-5, DTF2-6, DTF2-6-1, DTF2-8-1, and DTF2-5-1 (the last is an option).[1]
The following facts about the DCS 1440 Automatic Cleaning are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the DCS 1440 Automatic Cleaning are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the DCS 1440 Automatic Cleaning are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the DCS 1440 Automatic Cleaning are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the DCS 1440 Automatic Cleaning is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the DCS 1440 Automatic Cleaning are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Last updated Aug 14, 2026.
The Glen/YES 1000FP is a plasma cleaning system designed to accept a range of shelf sizes for changing flat panel industry needs.
The 1000P is a plasma cleaning system with four 16 x 16 inch shelves and a total capacity of 1024 square inches.