Disco

DGP 8761 DFM 2800

CMP Wafer Notch Visual Monitoring Alignment Option Disco DGP 8761 family

Research Quality: 20% complete

LinkedIn X Email

DGP 8761 DFM 2800 — Inventory photo — Fig. 01DGP 8761 DFM 2800Inventory photo^[1]

Wafer size

Wafer Notch Visual Monitoring Alignment Option

Power

50/60 Hz^[1]

What is it?

What do the numbers mean?

Power & electrical4

50/60 Hz^[1]
Phase: 3 phase^[1]
Full load Amps: 40 A^[1]
Voltage: 200V +/-10%^[1]

Wafer handling1

Mapping: Load FOUP Department (Carrier Wafer Slot and Insert Slash) with Mapping Perception^[2]

Control & software1

With HDD & Software^[1]

Accurate?

Configuration & options19

12 inch Kits^[1]; 3 Axis Dry Polishing (DP) Type 2^[1]; Z 1 Grinder^[1]; Z 2 Grinder^[1]; Z 3 Polisher^[1]
Full Load current: 72 A^[1]
Machine Main breaker Rating: 90 A^[1]
Ampere Rating of Largest Load: 33 A^[1]
Interrupt Capacity: 35 kA^[1]
Short Circuit Current Rating: 5000 A^[1]; Machine Main Breaker Rating; 50 A^[1]
Ampere Rating of Largest load: 25 A^[1]; Accessories Available:^[1]; Auto Label Printer^[1]; Dicing Tape Pre-Cut Unit^[1]; Swing NCG Specifications^[2]
Cut Function: 2 functions : Batch Cut and Pre Cut 2 functions^[2]; (DBG, SDBG, Auto TTV function included)^[2]; 3 Wire + Ground^[3]

Vintage & configurations

Documented models & variants

Designation	Generation	Vintage	Changes	Source
DGP 8761 / DFM 2800	—	2012–2020	Sources state different vintages and different wafer-size/configuration details across listings.	Equipment inventory listing^[1]

Interested in this tool?

Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

Configuration50/60 Hz^[1]
Phase3 phase^[1]
Full load Amps40 A^[1]
Voltage200V +/-10%^[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Not publicly documented

The following facts about the DGP 8761 DFM 2800 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the DGP 8761 DFM 2800 are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the DGP 8761 DFM 2800 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the DGP 8761 DFM 2800 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the DGP 8761 DFM 2800 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the DGP 8761 DFM 2800 are on record.
Answerable by: an OEM parts catalog or a service engineer