Koh Young
KY 8030 3 3D
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Koh Young KY 8030 3 3D is a 3D solder paste inspection system. The Koh Young KY 8030 3 3D is a metrology and inspection tool. The Koh Young KY 8030 3 3D performs full 3D solder paste inspection.[1][2][3][4]
What it is
How it works
General reference — not yet source-verifiedSolder paste inspection systems generally acquire surface data from printed deposits and compare measured features against process limits. Solder paste inspection systems typically report defects such as insufficient paste, excess paste, missing paste, bridging, and positional error so that printing problems can be corrected early.
Where it fits in the process flow
General reference — not yet source-verifiedSolder paste inspection tools are placed after stencil printing in an SMT line. Solder paste inspection tools check the printed board before component placement so that printing defects can be found before later assembly steps add value to a defective board.
Applications
General reference — not yet source-verifiedSolder paste inspection systems are used in electronic assembly processes that print paste onto pads before placing components. Solder paste inspection systems support process control for stencil printing by identifying deposition problems on boards headed to placement and soldering.
What do the numbers mean?
Power & electrical4
- 50/60 Hz[5]
Optics & imaging3
Performance1
Dimensions & facilities2
Configuration & options16
- Inspection technology
- Patented dual-projection 3D dual-inspection and Moiré interferometry, shadow-free measurement[4]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the KY 8030 3 3D are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the KY 8030 3 3D are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the KY 8030 3 3D are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the KY 8030 3 3D are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the KY 8030 3 3D are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the KY 8030 3 3D is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (5)Every fact above is drawn from these public sources
- [1]waferpedia.com — waferpedia.comwaferpedia.com
- [2]Equipment inventory listing
- [3]KOH YOUNG KY8030-3 3D SPI Machine — efsmt.comefsmt.com
- [4]cnsmtline.com — cnsmtline.comcnsmtline.com
- [5]Inventory photo
Last updated Oct 20, 2026.
Compare with similar tools
View all →The KLA .204 PSL Wafer is an 8-inch NIST-traceable reference wafer compatible with Surfscan 6xy0 and Sp1 particle counters.
KLA .496 PSL Wafer is an 8-inch NIST traceable wafer stated to be capable on Surfscan 6xy0 and SP1.
The KLA .498 PSL Wafer is a NIST traceable reference wafer.
