Quintel
Q 4000 Mask
What is it?
What do the numbers mean?
Power & electrical1
- Quintel Power Supply 365-405nm source; bottom shelve right side.[1]
Vacuum & pumping3
Wafer handling2
Optics & imaging6
- Joy Stick 1, mask viewing manipulator; left side.[1]
- Objective focus switch/ course align/ contact separation button; right side.[1]
- Head Lift Exposure Source with zoom objectives; center.[1]
- Mask Holder; center. (Note. Mask holder is fixed)[1]
- Split field objectives with zoom capabilities; center. (Note. Zoom course top, zoom fine bottom)[1]
- Objective slide knobs; located on right and left side of objective holder.[1]
Control & software2
Configuration & options4
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- ConfigurationQuintel Power Supply 365-405nm source; bottom shelve right side.[1]
- ConfigurationMicroscope illumination control panel & vacuum/ separation pressure gauge; left side.[1]
- ConfigurationSample holder vacuum chuck; sliding stage center.[1]
- ConfigurationExpose/ mask clamp/ mask vacuum/ clear/ load buttons; right side.[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Not publicly documented
The following facts about the Q 4000 Mask are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Q 4000 Mask are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Q 4000 Mask are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Q 4000 Mask are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Q 4000 Mask are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Q 4000 Mask is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]Inventory photo
Last updated Jul 29, 2026.
Compare with similar tools
View all →The EVG 101 is an advanced resist processing system for spin or spray coating and developing of wafers up to 300 mm.
