Seiko Epson
NX 1016 MT
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
The Seiko Epson NX 1016 MT is a handler used in test and probe operations. The Seiko Epson NX 1016 MT operates from 200 to 240 VAC, single phase, at 50/60 Hz.[1]
How it works
General reference — not yet source-verifiedA test and probe handler transfers devices through a repeatable handling path and presents each device at the test interface for contact. A handler in this class coordinates indexing, positioning, and device presentation so external test or probe hardware can perform measurements.
Where it fits in the process flow
General reference — not yet source-verifiedTest and probe handling equipment sits at the electrical verification stage of semiconductor manufacturing, after device fabrication and before later assembly or screening decisions. A handler in this class links material flow to the measurement step by feeding parts to the contact point and routing them onward after the test cycle.
Applications
General reference — not yet source-verifiedTest and probe handlers are used where semiconductor devices must be presented consistently for electrical contact and measurement. A handler in this class supports production and engineering workflows that depend on repeatable device positioning during probing or test.
What do the numbers mean?
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the NX 1016 MT are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the NX 1016 MT are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the NX 1016 MT are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the NX 1016 MT are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the NX 1016 MT are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the NX 1016 MT is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]waferpedia.com — waferpedia.comwaferpedia.com
Last updated Oct 15, 2026.
Compare with similar tools
View all →The Tenney TPS JR-A-F4T is a junior compact temperature test chamber with a 1.2 cubic foot chamber size and a temperature range of -68°C to +180°C.
The Rorze 03 RR 8120-001-001 is a wafer exchanger for 8-inch wafers.
The KLA 1007 is a wafer prober manufactured by KLA.