Semitool
Storm III Carrier
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
The Semitool Storm III Carrier Cleaner is a wet-processing clean tool for semiconductor manufacturing. It is a carrier cleaner configured for 8-inch wafers.[1]
How it works
General reference — not yet source-verifiedA carrier cleaner typically uses wet chemical action, rinsing, and drying to remove particles, films, and residue from carriers. The cleaning sequence is designed to reach surfaces and recesses where contamination can accumulate during wafer handling and transport.
In this class of equipment, parts are loaded into a cleaning chamber or processing station, exposed to cleaning and rinse steps, and then dried before release. The machine is part of contamination control rather than wafer patterning or deposition.
Where it fits in the process flow
General reference — not yet source-verifiedThe tool belongs in the wafer-handling and contamination-control flow, supporting cleanroom operations by preparing carriers for reuse between process steps.
Applications
General reference — not yet source-verifiedThis equipment is used in semiconductor fabs where reusable carriers must be kept clean for controlled wafer handling. It is relevant to wet-processing and cleanroom support operations.
What do the numbers mean?
No specifications recorded yet
Be the first to add cited specifications for this tool.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the Storm III Carrier are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No specifications for the Storm III Carrier are on record.
Answerable by: an OEM datasheet, a cleanroom equipment inventory, or an engineer who operated or installed it
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Storm III Carrier are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Storm III Carrier are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Storm III Carrier are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Storm III Carrier are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]Equipment inventory listing
Last updated Jul 30, 2026.
Compare with similar tools
View all →The Glen/YES 1000FP is a plasma cleaning system designed to accept a range of shelf sizes for changing flat panel industry needs.
The 1000P is a plasma cleaning system with four 16 x 16 inch shelves and a total capacity of 1024 square inches.