Strasbaugh
6 DA
How it works
The Strasbaugh 6 DA DC 2 uses individual spindle control and individual overarm control. The Strasbaugh 6 DA DC 2 also uses digital metering and an air polisher pressure system with individual pressure gauges.[4]
What do the numbers mean?
Power & electrical4
- 220 volts[1]
Configuration & options13
Vintage & configurations
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
How many stations does the Strasbaugh 6 DA DC 2 have?
The Strasbaugh 6 DA DC 2 has two stations.[4]
What power specification is given for the Strasbaugh 6 DA DC 2?
The Strasbaugh 6 DA DC 2 is specified for 220V single-phase power at 18 amp.[4]
What configuration details are given for the Strasbaugh 6 DA DC 2?
The Strasbaugh 6 DA DC 2 has individual 0 to 150 RPM spindle speed control, individual 0 to 100 RPM overarm speed control, 3/4 horsepower variable-speed electronic drives, a digital tachometer, a digital timer, a load meter, and an air polisher pressure system with individual pressure gauges.[4]
Not publicly documented
The following facts about the 6 DA are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 6 DA are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the 6 DA are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 6 DA are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 6 DA is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the 6 DA are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]Inventory photo
- [3]waferpedia.comwaferpedia.com
- [4]waferpedia.com — waferpedia.comwaferpedia.com
Last updated Oct 13, 2026.
Compare with similar tools
View all →
The Logitech 1 DP 41 is a polisher with 3-phase, 50/60 Hz, 480 V, 12 amp electrical requirements.
The Strasbaugh 100R16 is a 1-spindle grinder/polisher with a DC drive system and 2 motors. The Strasbaugh 100R16 has a 16-inch capacity.
The Lapmaster 12 Benchtop Lapping / Polishing Machine is a bench-mounted single-sided lapping and polishing machine with a 12-inch plate diameter.
