Applied Materials
Endura 5500 HP
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Applied Materials Endura 5500 HP is a sputtering system. The Applied Materials Endura 5500 HP is categorized as deposition. The Applied Materials Endura 5500 HP has a 3 wire + ground configuration and uses 200 vac, 30 - 60 Hz power.[1][2]
What it is
The Applied Materials Endura 5500 HP is a sputtering system. The Applied Materials Endura 5500 HP is categorized as deposition. The Applied Materials Endura 5500 HP has a 3 wire + ground configuration and uses 200 vac, 30 - 60 Hz power.[1][2]
How it works
Where it fits in the process flow
General reference — not yet source-verifiedDeposition tools of this class are placed at points in a wafer flow where a new thin film must be added before later lithography, etch, anneal, or planarization steps. Sputtering tools commonly sit around module formation and interconnect integration where conductive or barrier-related layers are needed as part of device build-up.
Applications
General reference — not yet source-verifiedSputtering systems are used for thin-film formation in semiconductor manufacturing and related microfabrication work. Deposition by sputtering is commonly applied where a process requires metallic or other functional films with controlled coverage and composition on patterned or unpatterned wafers.
What do the numbers mean?
Power & electrical4
Configuration & options6
- 3 wire + ground[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the Endura 5500 HP are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Endura 5500 HP are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Endura 5500 HP are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Endura 5500 HP are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Endura 5500 HP are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Endura 5500 HP is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]waferpedia.com — waferpedia.comwaferpedia.com
- [3]Inventory photo
- [4]Inventory photo
Last updated Oct 16, 2026.
Compare with similar tools
View all →
The Applied Materials 0010-13622 is an RF match unit intended for PVD (Physical Vapor Deposition) described as a High Efficiency HE RF Match-Bias.
The Applied Materials 0020 12458 Part is an insulator, side match component for the Hdp-Cvd Ultima Plus system.