CHA
SE600
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
Plate 01My Design BROTHER SE600 Embroidery machine #shorts
GraceyWatch on YouTubePlate 02CHA SE-600-RAP E-Beam Evaporator
Bid ServicellcWatch on YouTubePlate 03Brother SE600: How to setup for sewing (Thread your machine and wind a bobbin!) - SE625/SE630
JK StudioWatch on YouTubePlate 04CHA SE-600-RAP Evaporator #58417
Bid ServicellcWatch on YouTubePlate 05Brother SE600 Computerized Sewing and Embroidery Machine with 4" x 4" Embroidery Area
Brother Sews USAWatch on YouTubePlate 06How to set up the Se 600 to Sew
The Impossible Co.Watch on YouTubePlate 07CHA SE-600-RAP Evaporator
Bid ServicellcWatch on YouTubePlate 08How to thread the Brother SE600 Sewing:embroidery machine for embroidering
A-Dubb Productions Allan WadeWatch on YouTubePlate 09EMBROIDER right OUT THE BOX Brother SE600 - STEP BY STEP DETAILED
dane meddingsWatch on YouTube
Wafer size
300mm
Optics
Electron Beam Lithography System[1]
What is it?
Applications
The CHA SE600 is used for gold evaporation.[3]
- Direct-write applications
What do the numbers mean?
Wafer handling2
Optics & imaging4
Configuration & options7
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What type of equipment is the CHA SE600?
The CHA SE600 is an electron beam evaporator.[2]
Not publicly documented
The following facts about the SE600 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the SE600 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the SE600 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the SE600 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the SE600 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the SE600 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]cnf.cornell.edu — cnf.cornell.educnf.cornell.edu
- [2]fabsurplus.com — fabsurplus.comfabsurplus.com
- [3]semi-sps.com — semi-sps.comsemi-sps.com
- [4]waferpedia.com — waferpedia.comwaferpedia.com
Last updated Oct 20, 2026.
Compare with similar tools
View all →The SUSS MicroTec DSC300 Gen2 is an automated full-field scanning projection lithography system for wafers up to 300 mm.
The MA300 Gen2 is an automated mask aligner from SUSS MicroTec for proximity exposure of wafers up to 300 mm.
ASML Twinscan XT 1950 Hi is a scanner for 12-inch wafers used for 193 nm immersion lithography with 38 nm resolution capacity.