CyberOptics
SQ 3000 3D AOI SPI
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
How it works
General reference — not yet source-verifiedAutomated optical inspection systems illuminate the board with structured light or other optical techniques and capture images with high-resolution cameras.
Captured images are analyzed by image-processing software that compares measured features against programmed design rules and reference data.
Where it fits in the process flow
General reference — not yet source-verifiedSolder paste inspection occurs immediately after paste printing to verify deposit volume, height, area, shape, and alignment before component placement.
Automated optical inspection after reflow soldering checks for defects such as missing components, tombstoning, bridging, insufficient solder, and misalignment.
What do the numbers mean?
Optics & imaging2
Configuration & options4
- Inline[2]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What kind of equipment is the CyberOptics SQ 3000 3D AOI SPI?
The CyberOptics SQ 3000 3D AOI SPI is an automated optical inspection and solder paste inspection system.[1][2]
Is the CyberOptics SQ 3000 3D AOI SPI an inline system?
The CyberOptics SQ 3000 3D AOI SPI is configured as an inline system.[1][2]
What manufacturing area uses the CyberOptics SQ 3000 3D AOI SPI?
The CyberOptics SQ 3000 3D AOI SPI is used in electronics manufacturing.[2]
Not publicly documented
The following facts about the SQ 3000 3D AOI SPI are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the SQ 3000 3D AOI SPI are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the SQ 3000 3D AOI SPI are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the SQ 3000 3D AOI SPI are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the SQ 3000 3D AOI SPI are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the SQ 3000 3D AOI SPI is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]waferpedia.com — waferpedia.comwaferpedia.com
Last updated Oct 19, 2026.
Compare with similar tools
View all →The KLA .204 PSL Wafer is an 8-inch NIST-traceable reference wafer compatible with Surfscan 6xy0 and Sp1 particle counters.
KLA .496 PSL Wafer is an 8-inch NIST traceable wafer stated to be capable on Surfscan 6xy0 and SP1.
The KLA .498 PSL Wafer is a NIST traceable reference wafer.
