Disco
DGP 8761 + DFM 2800 In-Line
What is it?
What do the numbers mean?
Vacuum & pumping1
- Vacuum Maintenance Using Vacuum Ejector[1]
Wafer handling3
Control & software2
Configuration & options14
- Fully Automatic[1]
- 3 Axis[1]
- Spinner Table 200 mm/300 mm Universal (Orientation Flat)[1]
- Transport jig Machine hoisting jig+ Export packing hardware[1]
- USB Memory[1]
- Primary Piping Joint for DGP8761 (Dry Polish Specification)[1]
- Primary Piping Joint for Sub-Air Switching Unit[1]
- Automatic Wheel Position Setup[1]
- Sub-Air Switching Unit[1]
- Z3-axis processing point temperature sensor (without adjustment jig)[1]
- Host communication SECS-1/-2 and GEM compliant[1]
- EMO Guard Ring for DGP8761[1]
- EMO guard ring for DTU1531[1]
- Power Cable for the DGP8761 7M[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- ConfigurationVacuum Maintenance Using Vacuum Ejector[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Not publicly documented
The following facts about the DGP 8761 + DFM 2800 In-Line are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the DGP 8761 + DFM 2800 In-Line are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the DGP 8761 + DFM 2800 In-Line are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the DGP 8761 + DFM 2800 In-Line are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the DGP 8761 + DFM 2800 In-Line are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the DGP 8761 + DFM 2800 In-Line is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]Inventory photo
Last updated Jul 29, 2026.
