Heller
2043 MK 7
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Heller 2043 MK 7 is an SMT reflow oven. The Heller 2043 MK 7 has 13 heated zones on top and 13 heated zones on the bottom. The Heller 2043 MK 7 has a maximum PCB width of 22 inches.[1][2][3][4]
What it is
How it works
General reference — not yet source-verifiedA reflow oven heats a populated circuit board through a controlled temperature profile so solder paste melts and then solidifies into electrical and mechanical joints.
Where it fits in the process flow
General reference — not yet source-verifiedA reflow oven sits in the SMT assembly flow after solder paste printing and component placement.
A reflow oven follows placement so the board can be heated into the soldering profile that forms the final joints.
Applications
General reference — not yet source-verifiedReflow ovens are used for SMT soldering of assembled printed circuit boards.
What do the numbers mean?
Gas & chemistry1
Performance2
Control & software2
Dimensions & facilities6
Configuration & options13
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Process gas optionsAir, Nitrogen[2]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
How many heating zones does the Heller 2043 MK 7 have?
The Heller 2043 MK 7 has 13 heating zones in the top and 13 in the bottom.[2][3][4]
What is the maximum PCB width the machine can handle?
The maximum PCB width is 55.9 cm (22 inches) or 560 mm.[2][3][4]
What process gases can the Heller 2043 MK 7 use?
The oven can operate with air or nitrogen. In nitrogen mode it can achieve oxygen levels below 100 ppm.[2][3]
What is the maximum working temperature of the 2043 MK 7?
The maximum working temperature is 350 °C standard, with an optional 400 °C.[2][3]
What is the weight and outer dimensions of the machine?
The machine weighs approximately 3400 kg and has overall dimensions of 7224 mm width, 1520 mm depth, and 1440 mm height.[4]
Not publicly documented
The following facts about the 2043 MK 7 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 2043 MK 7 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 2043 MK 7 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 2043 MK 7 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 2043 MK 7 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 2043 MK 7 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (5)Every fact above is drawn from these public sources
- [1]Equipment inventory listing
- [2]efsmt.com — efsmt.comefsmt.com
- [3]HELLER 2043 MK7 SMT Reflow Oven — qismt.comqismt.com
- [4]flason-smt.com — flason-smt.comflason-smt.com
- [5]waferpedia.comwaferpedia.com
Last updated Oct 13, 2026.
Compare with similar tools
View all →The Blue M 0 500 is an oven manufactured by Blue M, with asset number 139866.
The Varian 0332 F 9453 302 Diffusion is a diffusion pump.