Heller

The Heller 1088 is a forced-convection SMT reflow oven designed for medium- to high-volume PCB assembly.

The Heller 1809 MK III SMT is a reflow oven for SMT soldering applications.

The Heller 1809 EXL is a forced convection reflow oven for soldering surface-mount components, featuring 9 top and 9 bottom heating zones, dual-zone active cooling, and temperature control accuracy of ±0.1°C, capable of handling board widths up to 23.5 inches.

The Heller 1913 MKIII is a reflow oven used for soldering electronic components onto printed circuit boards.

The Heller 1936 MK 5 is a reflow oven with a net belt and 10 zones.

The Heller 1707 MK 3 is a reflow oven with seven top/bottom heat zones, one cooling zone, and an edge rail mesh conveyor for left-to-right travel.

The Heller 1707 MK7 is an ISO-certified reflow oven system with 7 heated zones, 1 cool zone, and options for air or nitrogen process gas.

The Heller 1810 MK 5 is a reflow oven described as having low hours, edge rails, a mesh belt, and right-to-left orientation.

The Heller 1826 MK 5 is a reflow oven with a belt and 10 zones.

The Heller 1707 MK 5 is a reflow oven, also described as an oven, with a 400 V supply that can convert to 220 V.

The Heller 1707 MK 5 Ultra Low Power & Nitrogen Consumption is a 100% forced convection reflow oven with multiple heating zones, conveyor transport, cooling, and computer control.

The Heller 1808 Mark 3 is an SMT reflow oven with 8 heat zones.

The Heller 1500EXL is a forced convection reflow oven in Heller’s EXL Series with five heating zones, one internal cooling zone, five thermocouple profiling, and line speeds up to 28 inches (70 cm) per minute.

The Heller 1900EXL is a forced convection reflow oven in the EXL Series with twelve heating zones, two internal cooling zones, five thermocouple profiling, and line speeds up to 63 inches per minute.

The Heller 1826 is an SMT reflow oven system with 8 heated zones, up to 1.88 m/min belt speed, and a maximum PCB width of 55.9 cm.

The Heller 2043MK5-VR is a voidless vacuum reflow oven with 10 heated convection zones, 3 IR zones, and a 430 cm total heated length.

The Heller HMO-50 is a horizontal in-line magazine curing oven with a magazine loader and unloader, and a magazine return conveyor system.

The Heller 788 is an in-line, continuous cure, vertical format oven.

The Heller 1700EXL is a forced convection reflow oven in the EXL series with six heating zones, one internal cooling zone, five thermocouple profiling, and line speeds up to 32 inches per minute.

The Heller MK7 is an ISO-certified reflow oven system with configurable air or nitrogen process gas options and multiple size variants.

The Heller 1810 MK III IR is an IR cure oven with 18-inch on-load and off-load conveyors, 20 independent temperature-controlled IR heating zones, and a 130-inch heated tunnel length.