MicroCraft
E 4 H 6151 Flying
The MicroCraft E 4 H 6151 Flying is a flying probe tester. The MicroCraft E 4 H 6151 Flying is a moving-probe bare-board tester with a 24" x 20" (610 x 510 mm) working area. The MicroCraft E 4 H 6151 Flying is used for bare-board test and probe inspection.[1][2][3]
What it is
General reference — not yet source-verifiedA flying probe tester is an electrical test system that checks conductive networks by moving probes to selected test points on a manufactured circuit. A flying probe tester is used when electrical verification is needed without a fixed dedicated fixture.
How it works
The MicroCraft E 4 H 6151 Flying is configured with 4 Type 7 probes, a Type E CCD camera system, and an MMA controller. The MicroCraft E 4 H 6151 Flying includes Microsoft Windows 10, high speed video capture hardware, a barcode printer, a scan wand, pre-installed software, TPG Software 1st License, and EVS Software 1st License with Error Viewer Software.[1][2]
Where it fits in the process flow
General reference — not yet source-verifiedA flying probe tester sits after board fabrication, when the conductive pattern has already been formed and the bare board is ready for electrical verification. A flying probe tester is used before downstream assembly so opens, shorts, and related connectivity faults can be screened before components are added.
What do the numbers mean?
Power & electrical1
- Test Point Generator.[1]
Optics & imaging2
Control & software6
Configuration & options9
- E4H6151 Moving Probe Bare Board tester 24"x20"(610x510mm).[1]
- With Microsoft Windows 10, High Speed Video Capture Hardware, Barcode Printer & Scan Wand.[1]
- Side Clamps for E4M, E4H & 4S6151 Models[1]
- 2 Sets of standard probes (blades or needles)[1]
- Accessories
- Side clamps for E4M, E4H and 4S6151 models; 2 sets of standard probes (blades or needles)[1]
What replaced it?
Alternatives
Tools documented as functional equivalents — same process step and wafer size, from a different manufacturer. Each equivalence cites its source.
- Accretech UF 3000 EX Automatic Wafer— Same function class: Test & Probe, nullCompare in depthsource[4]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- ConfigurationTest Point Generator.[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the E 4 H 6151 Flying are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the E 4 H 6151 Flying are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the E 4 H 6151 Flying are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the E 4 H 6151 Flying are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the E 4 H 6151 Flying are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the E 4 H 6151 Flying is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]inventory listing
- [2]E 4 H 6151 Flying — MicroCraft | Specs, Sourcing & Service | Waferpedia — waferpedia.comwaferpedia.com
- [3]MicroCraft E 4 H 6151 Flying family | Waferpedia — waferpedia.comwaferpedia.com
- [4]Equipment inventory listing
Last updated Oct 21, 2026.
Compare with similar tools
View all →
The Accretech UF 3000 EX Automatic Wafer is an automatic wafer prober in the Test & Probe category.
The Tenney TPS JR-A-F4T is a junior compact temperature test chamber with a 1.2 cubic foot chamber size and a temperature range of -68°C to +180°C.
The Rorze 03 RR 8120-001-001 is a wafer exchanger for 8-inch wafers.