Heller

1810 MK III IR

Research Quality: 30% complete

What is it?

The Heller 1810 MK III IR is an IR cure oven with 18-inch on-load and off-load conveyors, 20 independent temperature-controlled IR heating zones, and a 130-inch heated tunnel length.

What do the numbers mean?

Power & electrical2

Voltage: 480V, 50/60 HZ, 3 phase, 100 AMPS per phase · Left to Right Conveyor Travel^[1]; SMEMA Electrical Interface Up and Down Stream^[1]

Vacuum & pumping2

Power controlled Clamshell Hood Lift · Single exhaust port for easy facilitization^[1]

Accurate?

Exhaust Monitoring Systems with Delayed Startup & Purge System^[1]

Accurate?

Control & software4

Temperature: PID temperature control to ensure zone temperature stability to +/- 1°C^[1]; Edge Hold Conveyor (Computer Controlled) with 4.8mm or .187” long EHC Pins^[1]; Slow Belt Speed Control Rang from .5” – 3” Per minute^[1]; Battery Back-Up of Computer, Controller & Edge Hold Conveyor^[1]

Dimensions & facilities1

Floor space requirements: 183"L x 54"W x 63"H^[1]

Configuration & options11

18” On Load Conveyor and 18” Off Load Conveyor^[1]; 130" Heated Tunnel Length · No Internal Cooling Modules^[1]
Temperature: 20 Independent Temperature Controlled 350°C IR Heating Zones^[1]; Complete KIC & ECD Profiling & Storage^[1]; Signal Light Tower to indicate system status^[1]; 4 moveable casters for easy relocation around shop floor^[1]; Included Options:^[1]; Front Rail Fixed^[1]; 18” Wide ½” Pitch Mesh Belt for Process up to - 18” Wide Products^[1]; Automatic Lubrication System for Edge Hold Conveyor^[1]; Audible Alarm^[1]

Interested in this tool?

Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

ConfigurationPower controlled Clamshell Hood Lift · Single exhaust port for easy facilitization^[1]
Voltage480V, 50/60 HZ, 3 phase, 100 AMPS per phase · Left to Right Conveyor Travel^[1]
ConfigurationSMEMA Electrical Interface Up and Down Stream^[1]
ConfigurationExhaust Monitoring Systems with Delayed Startup & Purge System^[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Not publicly documented

The following facts about the 1810 MK III IR are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 1810 MK III IR are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 1810 MK III IR are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 1810 MK III IR are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 1810 MK III IR are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 1810 MK III IR is not on record.
Answerable by: an OEM datasheet or a fab qualification report