Laurell
H6-15
Wafer size
300mm
Power
95 to 240VAC, 47/63HZ, ~300 Watts[1]
What is it?
What can it run?
Process applications and technology nodes documented for this tool.
- Coating
- Etching
- Developing
- Rinsing-Drying
- Cleaning
- Glove box processing
- Solvent-based processing
- Base-based processing
- Acid-based processing
What do the numbers mean?
Power & electrical1
Vacuum & pumping1
Wafer handling2
Control & software1
- Controller/software
- Wireless tablet featuring Laurell Touch process control software; accompanying PC software Spin 3000 is also mentioned[1]
Dimensions & facilities1
Configuration & options3
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Not publicly documented
The following facts about the H6-15 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the H6-15 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the H6-15 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the H6-15 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the H6-15 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the H6-15 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]web.archive.org — web.archive.orgweb.archive.org
- [2]web.archive.org — web.archive.orgweb.archive.org
- [3]web.archive.org — web.archive.orgweb.archive.org
Last updated Jul 29, 2026.
Compare with similar tools
View all →
The Laurell EDC-HL-15 B is a 650-series EDC spin processor that accommodates up to 300 mm wafers and 9" × 9" substrates.
The Laurell WS-650-15 is a station-mounted spin coater in the 650-series that accommodates up to 300mm wafers and 9" × 9" substrates and reaches a maximum rotational speed of 12,000 RPM.
Laurell's WS-400-6NPP is a 400-series spin coater with a 400-series process controller, a 1.75" vacuum chuck, and support for wafers up to 150 mm.
The Laurell EDC-HL-23 B is a compact EDC spin processor with capacity for up to 150 mm wafers and 5 in x 5 in substrates.
