Signatone

The Signatone WL-1160 is an RF/microwave probe station designed for high-frequency, high-power, and millimeter-wave applications.

The Signatone 1160 is a probe station microscope for viewing samples and parametric probing of devices.

The Signatone S-750 is a joystick micropositioner with a 9:1 motion ratio and a 0.10" x 0.180" scan area.

The Signatone S-1060R is a 4-inch hot chuck thermal probing system with controller model 1060R and a specified temperature range from ambient to 600°C.

The Signatone S 1160 MW D 6 is a probe station for 6-inch wafers.

The Signatone C 312 S is a 12-inch manual probe station.

The Signatone H150W is a manual hybrid probe station configured for 4-inch applications.

The Signatone WL-210 is an RF / Microwave probe station in the WaveLink Series with a compound X-Y stage, non-ferrous chuck and stage assembly, and support for wafers, substrates, PCB's, and ultra-thin wafers.

The Signatone S-460 is a 6-inch semi-automatic probe station with automated wafer stepping, motorized theta, and a quick two-point align feature.

The Signatone S-302-4 is a four point resistivity probe station used for sheet resistance and resistivity measurements of substrates and thin films.

The Signatone QuadPro Mark 12 is a probe station with a ~12-inch wafer stage surface and TCR capability.

The Signatone H-100 is a probe station with a three inch square device/substrate chuck, designed primarily for probing thick film devices.

The Signatone WL 250 is a semi-automatic probe station.

The Signatone Pro4 series provides simple answers to sheet and bulk resistivity measurements.

Signatone SP4 is a disposable plastic four point probe head for room-temperature resistivity measurement.

The Signatone S-96MW is a micropositioner.

The Signatone TH-760 is a test head probe station designed for probing devices mounted directly in a test head.

The Signatone S 1160 A 5 is a probe station with a 5-inch diameter vacuum chuck and 5-inch by 5-inch stage travel.

The Signatone S-1160 is a rugged, economically priced probe station configured for applications including RF probing, low-current probing, failure analysis, and thermal probing.

The Signatone S 1160 A 8 N is a probe station stated to have 8-inch wafer size and source measure units.