Waferpedia

YES

PBV-300

Thermal / Diffusion300mmYES PBV-300 family
Research Quality: 40% complete
PBV-300 — web.archive.org
Fig. 01PBV-300web.archive.org[1]

Wafer size

300mm

Vacuum

Polyimide/BCB Vacuum Cure Ovens[2]

What is it?

The sources list PBV-300 among YES products and place it in the polyimide/BCB vacuum cure oven group. One source describes it as an automated model within the Polyimide/BCB Vacuum Cure Ovens line, and another lists it under fully automated 300mm and 200mm polyimide/BCB/copper anneal/vacuum bake systems.

What can it run?

Process applications and technology nodes documented for this tool.

  • polyimide cure
  • BCB cure
  • copper anneal
  • low-k dielectric processing

What do the numbers mean?

Vacuum & pumping1

Process family
Polyimide/BCB Vacuum Cure Ovens[2]
Accurate?

Wafer handling1

Wafer size
300mm and 200mm[1]
Accurate?

Configuration & options2

Automation
Automated[2]
Accurate?
Associated process applications
polyimide, BCB, low-k dielectrics and copper anneal[2]
Accurate?
Interested in this tool?
Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

  • Process familyPolyimide/BCB Vacuum Cure Ovens[2]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Not publicly documented

The following facts about the PBV-300 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

  • No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the PBV-300 are on record.

    Answerable by: OEM historical records or a trade-press announcement

  • No publicly documented variants, configuration options, or revision breakpoints of the PBV-300 are on record.

    Answerable by: an OEM product catalog or an engineer who ordered or specified the tool

  • The control-system platform and OS era of the PBV-300 are not on record.

    Answerable by: an engineer who operated it or OEM installation records

  • No publicly documented failure modes or field errata for the PBV-300 are on record.

    Answerable by: a field service engineer, process engineer, or maintenance technician

  • The process node or technology generation of the PBV-300 is not on record.

    Answerable by: an OEM datasheet or a fab qualification report

No research found yet — worked with this tool? Share what you know.

Sources & citations

Sources (2)Every fact above is drawn from these public sources
  1. [1]web.archive.orgweb.archive.orgweb.archive.org
  2. [2]web.archive.orgweb.archive.orgweb.archive.org
Was this page accurate?

Last updated Jul 29, 2026.

Compare with similar tools

View all →