Denton Vacuum

The Denton Vacuum EE-4 is an electron beam deposition tool with a 6-position hearth, a dual chamber design, automated pump-down/venting, and capacity for multiple wafer sizes.

The Denton SJ20C is an electron-beam evaporation tool used for physical vapor deposition of a wide range of materials.

The Denton Explorer 14 RF Sputterer is an RF sputterer manufactured by Denton Vacuum.

The Denton SJ20C is an e-beam evaporation tool used as a film thickness monitor and deposition controller.

The Denton DCP-1 is a critical point dryer for preparing delicate wet specimens for dry condition without distortive effects of air drying.

The Denton Vacuum 635 is a sputter deposition tool with four confocal cathodes, an 8-inch diameter stage, and configurable DC, RF, and reactive sputtering capabilities.

Denton Discovery 18 is a sputter deposition system for metals, alloys, and insulating thin films with user-configurable deposition settings.

The Denton Vacuum Integrity-50 is a fully automated ophthalmic coating system with vacuum chamber, pumping, gauging, pressure/flow control, substrate fixturing/rotation, heater, ion source, electron beam evaporation source, low voltage resistance sources, source shutters, and deposition control.

The Integrity-20 is an ophthalmic AR coating system designed for compact, economical operation and maximum production in a minimal space.

The Integrity-29 is an ophthalmic coating system with a 29-inch stainless-steel vacuum chamber and integrated deposition, pumping, gauging, gas control, fixturing, heating, ion source, and automation subsystems.

The Integrity-36 is an ophthalmic coating system with a 36-inch stainless-steel vacuum chamber and integrated deposition, pumping, control, and fixturing subsystems.

The Denton DV 502 A is a vacuum evaporator with a 12-inch diameter by 12-inch-high bell jar and an implosion guard.

The Denton Infinity 18 is an evaporator with a Telemark 860 deposition controller panel and an 18" x 23" x 36" chamber size.

The Denton Vacuum CC-105 is a broad beam cold cathode ion source designed for ion-assisted evaporation processes.

The Denton Discovery Cathode Deposition System is a 12.0-inch sputtering system with planetary load lock and robot loading assemblies.

The Denton Desk II Desktop is a desktop sputtering unit used for metal deposition.

The Denton BTT IV Thermal Evaporator is a benchtop turbo high-vacuum thermal evaporation system configured with one thermal evaporative source, a crystal film thickness monitor option, and a quartz bell jar.

The Denton Explorer 14 is a sputtering system with a 14-inch by 14-inch chamber, two RF cathodes, and RF plasma clean support.