Keysight
4294 A Impedance Analyzer
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Keysight 4294 A Impedance Analyzer is a precision impedance analyzer. The Keysight 4294 A Impedance Analyzer covers 40 Hz to 110 MHz. The Keysight 4294 A Impedance Analyzer uses a four-terminal pair measurement configuration.[1][2]
What it is
How it works
The Keysight 4294 A supports impedance measurement with a four-terminal-pair front end and can also be used through adapter configurations for 7 mm and probe-based measurements.[2][1]
The 4294 A includes impedance analysis functions such as equivalent-circuit modeling, marker functions, limit-line testing, list sweep, averaging, and DC bias capability.[1][5]
Where it fits in the process flow
The 4294 A fits in component characterization, quality assurance, and incoming inspection workflows.[1]
The 4294 A is used before final part release when engineers need impedance data for component selection, circuit design validation, and inspection of electrical behavior under operating conditions.[1][5]
Applications
What do the numbers mean?
Power & electrical4
Performance1
Configuration & options8
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| 4294A-1D5 | — | — | High-stability frequency reference option. | assets.testequity.com[2] |
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the 4294 A Impedance Analyzer are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 4294 A Impedance Analyzer are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the 4294 A Impedance Analyzer are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 4294 A Impedance Analyzer are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 4294 A Impedance Analyzer is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the 4294 A Impedance Analyzer are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (5)Every fact above is drawn from these public sources
- [1]keysight.com — keysight.comkeysight.com
- [2]assets.testequity.com — assets.testequity.comassets.testequity.com
- [3]inventory listing
- [4]4294 A Impedance Analyzer — Keysight | Specs, Sourcing & Service | Waferpedia — waferpedia.comwaferpedia.com
- [5]https://www.testequipmenthq.com/datasheets/Keysight-4294A-Datasheet.pdf — testequipmenthq.comtestequipmenthq.com
Last updated Oct 19, 2026.
Compare with similar tools
View all →
The Applied Materials 0010-13627 is a high efficiency RF match designed for semiconductor equipment.
General referenceThe Applied Materials 0015 20064 Part is an identified component within the lab and support equipment category, used in a supporting role around semiconductor manufacturing and processing tools.
Applied Materials 0020 19652 is a retainer bracket, top match part described as for 200mm Ultim.