Leybold
Heraeus Membranovac 1 VS Vacuum Pressure Controller
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Leybold Heraeus Membranovac 1 VS Vacuum Pressure Controller is a vacuum pressure controller. The Leybold Heraeus Membranovac 1 VS Vacuum Pressure Controller is specified for 110V–240V AC. The Leybold Heraeus Membranovac 1 VS Vacuum Pressure Controller is specified for 50/60 Hz and 1.5 VA.[1][2]
What it is
How it works
Where it fits in the process flow
General reference — not yet source-verifiedVacuum pressure controllers belong to the support layer around process and laboratory equipment rather than to a single front end fabrication step. Vacuum pressure controllers are placed where a tool, chamber, fixture, or test setup needs controlled vacuum conditions before, during, or after the main operation of the attached equipment.
Applications
General reference — not yet source-verifiedVacuum pressure controllers are used with laboratory vacuum setups, analytical equipment, and supporting process hardware that require regulated reduced pressure. Vacuum pressure controllers can support evacuation, pressure hold, degassing, filtration, drying, and other vacuum assisted tasks where pressure stability affects repeatability.
What do the numbers mean?
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What kind of equipment is the Leybold Heraeus Membranovac 1 VS?
The Leybold Heraeus Membranovac 1 VS is a vacuum pressure controller.[1][2]
What category does the Membranovac 1 VS belong to?
The Membranovac 1 VS belongs to the lab and support equipment category.[2]
What input voltage does the Membranovac 1 VS require?
Not publicly documented
The following facts about the Heraeus Membranovac 1 VS Vacuum Pressure Controller are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Heraeus Membranovac 1 VS Vacuum Pressure Controller are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Heraeus Membranovac 1 VS Vacuum Pressure Controller are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Heraeus Membranovac 1 VS Vacuum Pressure Controller are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Heraeus Membranovac 1 VS Vacuum Pressure Controller are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Heraeus Membranovac 1 VS Vacuum Pressure Controller is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]waferpedia.com — waferpedia.comwaferpedia.com
Last updated Oct 17, 2026.
Compare with similar tools
View all →
The Applied Materials 0010-13627 is a high efficiency RF match designed for semiconductor equipment.
General referenceThe Applied Materials 0015 20064 Part is an identified component within the lab and support equipment category, used in a supporting role around semiconductor manufacturing and processing tools.
Applied Materials 0020 19652 is a retainer bracket, top match part described as for 200mm Ultim.