Neslab
HX 750 W Recirculating Water Chiller
The Neslab HX 750 W is a recirculating water chiller. The Neslab HX 750 W operates over a temperature range of +5 to +35°C. The Neslab HX 750 W provides a cooling capacity of 6820 BTU/HR at 20°C.[1][2]
What it is
How it works
General reference — not yet source-verifiedA recirculating water chiller works by continuously circulating a coolant through a closed loop, removing heat from a connected process tool and rejecting it through a refrigeration cycle.
Where it fits in the process flow
General reference — not yet source-verifiedThe chiller connects to a specific tool's cooling water inlet and outlet, maintaining a constant temperature setpoint to prevent thermal drift in sensitive processes such as lithography, etching, or metrology.
What do the numbers mean?
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Why use a closed-loop chiller instead of utility water alone?General reference — not yet source-verified
Machines of this class provide cleaner, more stable, and more controllable cooling conditions than an uncontrolled utility supply at the tool connection. A closed loop also helps reduce contamination exposure, limit fluid consumption at the point of use, and isolate the supported equipment from variation in facility water temperature.
What kinds of equipment are commonly connected to this class of system?General reference — not yet source-verified
Typical connected loads include lasers, analytical instruments, vacuum pumps, power supplies, condensers, imaging systems, and process hardware with water-cooled jackets or heat exchangers. Any tool that generates heat and requires stable coolant temperature may use this class of support equipment.
What are the main functional elements of a recirculating chiller?General reference — not yet source-verified
Machines of this class generally include a pump to move fluid, a refrigeration section to remove heat, a heat exchanger, fluid containment, sensing and control hardware, and protective alarms or interlocks. Together these elements create a self-contained thermal control loop for external equipment.
Not publicly documented
The following facts about the HX 750 W Recirculating Water Chiller are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the HX 750 W Recirculating Water Chiller are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the HX 750 W Recirculating Water Chiller are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the HX 750 W Recirculating Water Chiller are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the HX 750 W Recirculating Water Chiller are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the HX 750 W Recirculating Water Chiller is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]inventory listing
- [2]inventory listing
Last updated Oct 15, 2026.
Compare with similar tools
View all →
The Applied Materials 0010-13627 is a high efficiency RF match designed for semiconductor equipment.
General referenceThe Applied Materials 0015 20064 Part is an identified component within the lab and support equipment category, used in a supporting role around semiconductor manufacturing and processing tools.
Applied Materials 0020 19652 is a retainer bracket, top match part described as for 200mm Ultim.