Nutek
NTM 920 DTCT Conveyor
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Nutek NTM 920 DTCT Conveyor is a conveyor unit classified as lab and support equipment. The Nutek NTM 920 DTCT Conveyor is a double conveyor with a length of 650 mm. The Nutek NTM 920 DTCT Conveyor operates from 230 VAC single-phase power and has a power rating of 250 VA.[1][2]
What it is
The Nutek NTM 920 DTCT is a conveyor unit classified as laboratory and support equipment. The model designation identifies it as part of the Nutek NTM family of equipment. The DTCT configuration is a double conveyor with a length of 650 mm. The unit operates from a 230 VAC single-phase electrical supply and has a power rating of 250 VA.[1][2]
What do the numbers mean?
Power & electrical1
Configuration & options10
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Voltage230 VAC 1 Phase[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What type of equipment is the Nutek NTM 920 DTCT?
The Nutek NTM 920 DTCT is a conveyor unit classified as lab and support equipment.[1][2]
What conveyor configuration does the Nutek NTM 920 DTCT use?
The Nutek NTM 920 DTCT uses a double-conveyor configuration.[1][2]
What is the conveyor length of the Nutek NTM 920 DTCT?
The Nutek NTM 920 DTCT has a conveyor length of 650 mm.[1][2]
Not publicly documented
The following facts about the NTM 920 DTCT Conveyor are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the NTM 920 DTCT Conveyor are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the NTM 920 DTCT Conveyor are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the NTM 920 DTCT Conveyor are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the NTM 920 DTCT Conveyor are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the NTM 920 DTCT Conveyor is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]waferpedia.com — waferpedia.comwaferpedia.com
Last updated Oct 19, 2026.
Compare with similar tools
View all →
The Applied Materials 0010-13627 is a high efficiency RF match designed for semiconductor equipment.
General referenceThe Applied Materials 0015 20064 Part is an identified component within the lab and support equipment category, used in a supporting role around semiconductor manufacturing and processing tools.
Applied Materials 0020 19652 is a retainer bracket, top match part described as for 200mm Ultim.