Perkin Elmer
Sublimator 115 V Vacuum Sublimation
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
General reference — not yet source-verifiedA sublimator is laboratory and support equipment used to deposit material by heating a source in vacuum so the material enters the vapor phase and then condenses on a cooler surface. Vacuum sublimation equipment belongs to the broader family of thin film deposition tools used outside the main patterning and etch sequence for sample preparation, coating, and related support work.
Where it fits in the process flow
General reference — not yet source-verifiedVacuum sublimation equipment is typically used in laboratory and support environments where thin coatings or prepared surfaces are needed before inspection, analysis, or subsequent handling. The process generally follows sample preparation and cleaning, and it precedes any downstream examination or use that depends on the deposited layer.
Applications
General reference — not yet source-verifiedVacuum sublimation equipment is used where a controlled deposited layer is needed on specimens, substrates, or small parts for analytical, preparative, or support purposes. Typical uses for this equipment class include forming thin films for laboratory work, improving surface condition for examination, and preparing samples for processes that benefit from a deposited coating.
What do the numbers mean?
Power & electrical2
Configuration & options3
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the Sublimator 115 V Vacuum Sublimation are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Sublimator 115 V Vacuum Sublimation are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Sublimator 115 V Vacuum Sublimation are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Sublimator 115 V Vacuum Sublimation are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Sublimator 115 V Vacuum Sublimation are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Sublimator 115 V Vacuum Sublimation is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]fab-spares.comfab-spares.com
- [3]Sublimator 115 V Vacuum Sublimation — Perkin Elmer | Specs, Sourcing & Service | Waferpedia — waferpedia.comwaferpedia.com
Last updated Oct 15, 2026.
Compare with similar tools
View all →
The Applied Materials 0010-13627 is a high efficiency RF match designed for semiconductor equipment.
General referenceThe Applied Materials 0015 20064 Part is an identified component within the lab and support equipment category, used in a supporting role around semiconductor manufacturing and processing tools.
Applied Materials 0020 19652 is a retainer bracket, top match part described as for 200mm Ultim.