Semitool
Raider ECD 312 Electroplating
The Semitool Raider ECD 312 Electroplating is an electroplating system. The Semitool Raider ECD 312 Electroplating includes FOUP loadport handling, a transfer robot with a linear dual arm and edge grip end effector, vacuum prewet, and a stack SRD. The Semitool Raider ECD 312 Electroplating operates on 3 phase power at 50/60 Hz and 380 V.[1][2]
What it is
The Semitool Raider ECD 312 is an electroplating system.[2][1]
How it works
The Raider ECD 312 includes FOUP loadport handling, a transfer robot with a linear dual arm and edge grip end effector, vacuum prewet, and a stack SRD.[2][1]
The Raider ECD 312 includes a chemical tank, circulation pump, filter housing, heater housing, level sensors, a tank control block, and electroplating chamber components.[2]
Where it fits in the process flow
General reference — not yet source-verifiedElectroplating equipment sits in a wet-process segment of semiconductor manufacturing.
Applications
General reference — not yet source-verifiedElectroplating tools are used for metal deposition on semiconductor wafers.
What do the numbers mean?
Power & electrical6
- 50/60 Hz[2]
Vacuum & pumping6
- Vacuum prewet, 1 Stack SRD[2]
- Flow pump (only eCD)[2]
- Chamber Components
- Chamber lift assy, Spin motor, Push plate control board, Plate sylinder (2), Contact Ring (only ECD), Lip seal (only eCD), Flow pump (only eCD), Anode basket (only eCD)[2]
- Tank Components
- Tank body, Circulation pump, Filter housing, Heater housing, Level sensor (5), Tank remote board, Tank control block[2]
Wafer handling3
Gas & chemistry3
- Chemical tank (11)[2]
Control & software3
- Push plate control board[2]
Configuration & options14
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Phase3 Phase[2]
- Configuration50/60 Hz[2]
- Voltage380 V[1]
- ConfigurationVacuum prewet, 1 Stack SRD[2]
- ConfigurationChemical tank (11)[2]
- ConfigurationFlow pump (only eCD)[2]
- Power Phase3 Phase[2]
- Frequency50/60 Hz[1]
- Vacuum and RinseVacuum prewet, 1 Stack SRD[2]
- Chemical Tanks11[2]
- Chamber ComponentsChamber lift assy, Spin motor, Push plate control board, Plate sylinder (2), Contact Ring (only ECD), Lip seal (only eCD), Flow pump (only eCD), Anode basket (only eCD)[2]
- Tank ComponentsTank body, Circulation pump, Filter housing, Heater housing, Level sensor (5), Tank remote board, Tank control block[2]
- Power3 Phase[1]
- Vacuum / rinseVacuum prewet, 1 Stack SRD[1]
- Gas / chemistryChemical tank (11)[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the Raider ECD 312 Electroplating are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Raider ECD 312 Electroplating are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Raider ECD 312 Electroplating are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Raider ECD 312 Electroplating are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Raider ECD 312 Electroplating are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Raider ECD 312 Electroplating is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]waferpedia.com — waferpedia.comwaferpedia.com
- [2]Inventory photo
Last updated Oct 16, 2026.
Compare with similar tools
View all →
The Applied Materials 0010-13627 is a high efficiency RF match designed for semiconductor equipment.
General referenceThe Applied Materials 0015 20064 Part is an identified component within the lab and support equipment category, used in a supporting role around semiconductor manufacturing and processing tools.
Applied Materials 0020 19652 is a retainer bracket, top match part described as for 200mm Ultim.