Ultron
UH 130 Expander
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
The Ultron UH 130 is a die matrix expander used in semiconductor assembly to separate die after wafer dicing.[3][1]
The UH 130 model accommodates wafers and film frames up to 200 mm (8 inches) in diameter.[1][4]
How it works
The UH 130 uses a pneumatic ram with speed control and a 2.3-inch adjustable stroke to press a heated wafer ram upward against a film frame, expanding the film and increasing die separation.[1]
A digital temperature controller regulates the heated stage via a thermistor, and an adjustable stroke stop ensures repeatable expansion height.[1][2]
The machine includes alignment pins for consistent film frame placement, a Plexiglass anti-static shroud, and an emergency stop button. An optional motorized circular cutter assembly is available for the UH 130.[1]
What do the numbers mean?
Power & electrical1
Vacuum & pumping1
Wafer handling3
Dimensions & facilities4
Configuration & options8
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| UH130-12 | — | — | Accommodates up to 300mm wafers; motorized circular cutter standard | ultronsystems.com[1] |
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What wafer sizes does the Ultron UH 130 support?
The UH 130 accommodates wafers and film frames up to 200 mm (8 inches).[1][4]
What is the stroke of the pneumatic ram?
The pneumatic ram has a 2.3-inch adjustable stroke.[1]
Does the heated stage have temperature control?
Yes, the UH 130 has a digital temperature-controlled heated stage with a thermistor.[1][2]
What are the electrical and pneumatic requirements?
The UH 130 requires 120 VAC, 3 A, 50/60 Hz electrical power and pneumatic air or nitrogen at 60 psi regulated.[2]
Is a motorized cutter available for the UH 130?
A motorized circular cutter assembly is available as an option for the model UH 130.[1]
What are the dimensions and weight of the UH 130?
The UH 130 measures 13.25 inches high (21 inches with outer grip ring holder), 16 inches wide, and 19.5 inches deep, with a weight of 95 pounds.[2]
Not publicly documented
The following facts about the UH 130 Expander are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the UH 130 Expander are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the UH 130 Expander are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the UH 130 Expander are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the UH 130 Expander is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the UH 130 Expander are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]ultronsystems.com — ultronsystems.comultronsystems.com
- [2]ultronsystems.com — ultronsystems.comultronsystems.com
- [3]Equipment inventory listing
- [4]Ultron UH-130 - J.M. Industries — jmind.comjmind.com
Last updated Aug 27, 2026.
